Skip Content

Filter Results By

Pressure Washer Motors

3 Results Found that Include 23 Products

Product availability based on selecting either shipping or pick up and a location. Dismiss
Results per page:  16 | 32 | 48
  • MARATHON MOTORS
  • MARATHON MOTORS Open Dripproof Capacitor-Start Pressure Washer Motors MARATHON MOTORS Open Dripproof Capacitor-Start Pressure Washer Motors
  • Multiple product options available

    Designed specifically for use on pressure washers, these definite purpose motors are corrosion-resistant and capable of handling both hot and cold water at high pressures. The moisture-resistant shaft system includes a 303 stainless-steel shaft and lubricated, spring-loaded contact seals in each endshield. A V-ring seal on shaft end is used to deflect water. The double-sealed, oversized bearings are lubricated with high-temperature, moisture-resistant lubricant. The bearing cavities are packed further to deter moisture ingress.

    • Enclosure: totally enclosed fan-cooled
    • Mounting: face/based
    • Insulation: Class B
    • Bearings: ball
    • Thermal protection: Manual
    • Max. ambient: 40°C

    Multiple product options available

5 HP Pressure Washer Motor, Capacitor-Start, 3450 Nameplate
  • TM

    Grainger Choice

  • DAYTON
  • 5 HP Pressure Washer Motor, Capacitor-Start, 3450 Nameplate RPM, 208-230 Voltage, 56HCZ Frame 5 HP Pressure Washer Motor, Capacitor-Start, 3450 Nameplate RPM, 208-230 Voltage, 56HCZ Frame
  • Pressure Washer Motor, Capacitor-Start, Open Dripproof, 5 HP, 3450 Nameplate RPM, 56HCZ Frame, CWSE Motor Shaft Rotation, Voltage 208-230, 22.0-20.0 Full Load Amps, 1 Phase, 60 Hz, Face/Base Motor Mounting Type, Motor Bearings Ball, Motor Thermal Protection Manual, 1.15 Motor Service Factor, Ambient Temperature 40 Degrees C, Shaft Dia. 3/4 In., Shaft Length 1-7/8 In., Insulation Class B, Standards UL Recognized and CSA Certified, Includes Water Slinger and Keyway

  • Item # 4UX55
  • Mfr. Model # 4UX55
  • Pressure Washer Motor, Capacitor-Start, Open Dripproof, 5 HP, 3450 Nameplate RPM, 56HCZ Frame, CWSE Motor...More

  • MARATHON MOTORS
  • MARATHON MOTORS TEFC Capacitor-Start Pressure Washer Motors MARATHON MOTORS TEFC Capacitor-Start Pressure Washer Motors
  • Multiple product options available

    Capable of handling both hot and cold water at high pressures, these definite purpose, pressure washer motors include a moisture-resistant shaft system with a 303 stainless-steel shaft and lubricated, spring-loaded contact seals in each endshield. A V-ring seal on shaft end is used to deflect water. The double-sealed, oversized bearings are lubricated with high-temperature, moisture-resistant lubricant. The bearing cavities are packed further to deter moisture ingress.

    • Enclosure: totally enclosed fan-cooled
    • Mounting: face/based
    • Insulation: Class B
    • Bearings: ball
    • Thermal protection: Manual
    • Max. ambient: 40°C

    Multiple product options available

Results per page:  16 | 32 | 48

Pressure washer motors from Grainger are corrosion resistant; for use in hot and cold water high-pressure washer applications. Moisture-resistant shaft system includes 303 stainless-steel shaft and lubricated, spring-loaded contact seals in each endshield. A V-ring seal on shaft end is used to deflect water. The double-sealed, oversized bearings are lubricated with high temperature, moisture-resistant lubricant. The bearing cavities are packed further to retard entrance of moisture.

Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More