Skip Content

Filter Results By

Applied Filters Clear All

Power Tools

114 Results Found that Include 129 Products

Product availability based on selecting either shipping or pick up and a location. Dismiss
Results per page:  16 | 32 | 48
Sectional Drain Cleaning Machine, 1/6 HP
Pipe Threading Machine,1/2 to 2 In
  • RIDGID
  • Pipe Threading Machine, 1/2 to 2 In Power Pipe Threading Machine
  • Item # 20KY54
  • Mfr. Model # 44923
  • Portable Pipe Threading Machine, Capacity 1/2 In. to 2 In., Reversing Yes, Overall Length 30 In., Overall...More

  • Category : Pipe Threading and Cutting Machines
Pneumatic Press,Range 400 Lbs,7 In Swing
  • TM

    Grainger Choice

  • DAYTON
  • Pneumatic Press, Range 400 Lbs, 7 In Swing Pneumatic Press,Range 400 Lbs,7 In Swing
  • Item # 4NHW5
  • Mfr. Model # 4NHW5
  • Pneumatic Press, Force in Tons 1/5, Force Range (Lbs.) 400, Swing (In.) 7, Table Work Surface (In.) 6 x...More

  • Category : Arbor Presses
Pavement Breaker,W/Truck,1 1/8,15A,120V
  • DEWALT
  • Pavement Breaker, W/Truck, 1 1/8,15A, 120V Pavement Breaker,W/Truck,1 1/8,15A,120V
  • Item # 1TDA5
  • Mfr. Model # D25980KB
  • Pavement Breaker, Amps @ 120V 15.0, Impact Energy (Ft.-Lb.) 61.0, Blows per Minute 900, Drive System 1-1/8...More

  • Category : Demolition Hammers
Magnetic Drill Press,350RPM,3/4 In Steel
  • MILWAUKEE
  • Magnetic Drill Press, 350RPM, 3/4 In Steel Magnetic Drill Press,350RPM,3/4 In Steel
  • Item # 3F865
  • Mfr. Model # 4206-1
  • Magnetic Drill Press, Voltage 120VAC, Capacity Steel 3/4 In., 11.5 Amps, No Load RPM 350, Drill Travel 11...More

  • Category : Magnetic Drill Presses
Magnetic Drill Press,750/375 RPM,1.25 In
  • MILWAUKEE
  • Magnetic Drill Press, 750/375 RPM, 1.25 In Magnetic Drill Press,750/375 RPM,1.25 In
  • Item # 3TB70
  • Mfr. Model # 4209-1
  • Magnetic Drill Press, Voltage 120VAC, Capacity Steel 1-1/4 In., MT3 Spindle Taper, 11.5 Amps, No Load RPM...More

  • Category : Magnetic Drill Presses
Breaker Hammer,1-1/8 In Hex,120V,15 Amps
  • BOSCH
  • Breaker Hammer, 1-1/8 In Hex, 120V, 15 Amps Breaker Hammer,1-1/8 In Hex,120V,15 Amps
  • Item # 6TXC1
  • Mfr. Model # BH2760VCB
  • Breaker Hammer, Amps @ 120V 15.0, Impact Energy (Ft.-Lb.) 35.0, Blows per Minute 1000, Drive System 1-1/8 In....More

  • Category : Demolition Hammers
Tank Mixer,Gear Drive,3/4 HP,316 SS
  • TM

    Grainger Choice

  • DAYTON
  • Tank Mixer, Gear Drive, 3/4 HP, 316 SS Tank Mixer,Gear Drive,3/4 HP,316 SS
  • Item # 32V141
  • Mfr. Model # 32V141
  • Tank Mixer, Gear Drive, Max. RPM 350, Shaft Dia. (In.) 3/4, Shaft Length (In.) 60, 3/4 HP, Motor 115 to 230V...More

  • Category : Drum Mixers
Drain Cleaning Machine,120VAC
  • TM

    Grainger Choice

  • WESTWARD
  • Drain Cleaning Machine, 120VAC Drain Cleaning Machine
  • Item # 22XP40
  • Mfr. Model # 22XP40
  • Drain Cleaning Machine, Drain Line I.D. Size Range 4 In. to 8 In., Max. Run 125 ft., HP 2/3, Operating Speed...More

  • Category : Drain Cleaning Machines
Cordless Combination Kit, Voltage 18.0 Li-Ion, Number of To
  • MAKITA
  • Cordless Combination Kit, Voltage 18.0 Li-Ion, Number of Tools 15 18.0 Volt Cordless Combination Kit
  • Item # 14F155
  • Mfr. Model # XT1500
  • Cordless Combination Kit, Voltage 18.0, Number of Tools 15, Tools Included Circular Saw, Cut Off Tool, Hammer...More

  • Category : Cordless Combination Kits
Cordless Knockout Tool Kit,1 Tool
Cordless Knockout Tool Kit,18.0V
Arbor Press,3 Tons
  • DAKE CORPORATION
  • Arbor Press, 3 Tons Arbor Press,3 Tons
  • Item # 40F022
  • Mfr. Model # 902002
  • Arbor Press, Force in Tons 3, Force Range (Lbs.) 0 to 6000, Swing (In.) 7, Table Work Surface (In.) 6.5 x...More

  • Category : Arbor Presses
Handheld Coring Drill,15 A,120V,Cap 6 In
Rebar Cutter Kit,12 Amps,1 In Cap
  • BN PRODUCTS USA
  • Rebar Cutter Kit, 12 Amps, 1 In Cap Rebar Cutter Kit,12 Amps,1 In Cap
  • Item # 10H744
  • Mfr. Model # DC-25X
  • Rebar Cutter, 12 Amps @ 120V, Max. Capacity (In.) 1, Blade Type Alloy Steel Cutting Blocks, Bearing Type...More

  • Category : Electric Rebar Cutters/Benders
Magnetic Drill Press,500/250 RPM,1.25 In
  • MILWAUKEE
  • Magnetic Drill Press, 500/250 RPM, 1.25 In Magnetic Drill Press,500/250 RPM,1.25 In
  • Item # 4A940
  • Mfr. Model # 4208-1
  • Magnetic Drill Press, Voltage 120VAC, Capacity Steel 1-1/4 In., MT3 Spindle Taper, 11.5 Amps, No Load RPM...More

  • Category : Magnetic Drill Presses
14" Walk Behind Concrete Saw, 8.5 HP Robin 4 Cycl
  • HUSQVARNA
  • 14" Walk Behind Concrete Saw, 8.5 HP Robin 4 Cycle Gasoline Engine Walk Behind Concrete Saw
  • Item # 2LDT9
  • Mfr. Model # FS 309
  • Walk Behind Concrete Saw, Power Source 4 Cycle Gasoline Engine, Blade Dia. 14 In., Arbor Size 1 In., Depth of...More

  • Category : Walk-Behind Concrete Saws
Core Drill,Handheld Wet/Dry,1.5 HP,6 In
  • HUSQVARNA
  • Core Drill, Handheld Wet/Dry, 1.5 HP, 6 In Core Drill,Handheld Wet/Dry,1.5 HP,6 In
  • Item # 6PEV2
  • Mfr. Model # DM220
  • Handheld Wet/Dry Core Drill, Motor HP 1.5, Amps @ 120V 15, No Load RPM 950/2150/4500, Core Bit Cap Concrete...More

  • Category : Coring Rig
Copper Cutting/Prep Machine,1/2 to 2 In
  • RIDGID
  • Copper Cutting/Prep Machine, 1/2 to 2 In Copper Cutting/Prep Machine,1/2 to 2 In
  • Item # 3FE66
  • Mfr. Model # 93492
  • Copper Cutting/Prep Machine, Capacity Tube and Fitting 1/2 In. to 2 In., 1/3 HP, Reversing No, Overall Length...More

  • Category : Pipe Threading and Cutting Machines
Horiz./Vert. Band Saw,HP 3/4,115/230 V
  • JET
  • Horiz./Vert. Band Saw, HP 3/4,115/230 V Horizontal/Vertical Band Saw
  • Item # 18F209
  • Mfr. Model # 414459
  • Horizontal/Vertical Band Saw, Cutting Capacity Rectangle 7 In. x 10-7/8 In. or 2 In. x 12 In., Cutting...More

  • Category : Band Saws
AVT Breaker Hammer 1 1/8 In Hex, 70 Lb.
Breaker Hammer,15Amps,31-1/4 L
  • BOSCH
  • Breaker Hammer, 15Amps, 31-1/4 L Breaker Hammer,15Amps,31-1/4 L
  • Item # 19TR99
  • Mfr. Model # BH2760VC
  • Breaker Hammer, Amps @ 120V 15, Impact Energy (Ft.-Lb.) 49.5, Blows per Minute 2500, Drive System Electric...More

  • Category : Demolition Hammers
1/2" Cordless Impact Wrench Kit, Voltage 14.4 Li-Ion,&
Cordless Knockout Tool,18V,13-5/8 in. L
Belt Sander,6 X 48 In,1 1/2 HP,2850 SFPM
  • JET
  • Belt Sander, 6 X 48 In, 1 1/2 HP, 2850 SFPM Belt Sander,6 X 48 In,1 1/2 HP,2850 SFPM
  • Item # 3WRR3
  • Mfr. Model # 414600
  • Belt Sander, 1-1/2 HP, Voltage 115/230, 20/10 Amps AC, 1 Phase, 60 Hz, Disc Dia. (In.) -, Disc Speed (RPM) -,...More

  • Category : Belt/Disc Sanders
Diamond Coring Rig,2.9 Hp,120  V,15 A,
  • HUSQVARNA
  • Diamond Coring Rig, 2.9 Hp, 120 V, 15 A, Diamond Coring Rig,2.9 Hp,120 V,15 A,
  • Item # 3RDN7
  • Mfr. Model # DMS 240
  • Diamond Coring Rig, Motor HP 2.9, Amps @ 120V 19.3, No Load RPM 185/455, Core Bit Cap Concrete 10 In, Base...More

  • Category : Coring Rig
Vertical Band Saw,HP 1-1/2,115/230 V
  • TM

    Grainger Choice

  • DAYTON
  • Vertical Band Saw, HP 1-1/2,115/230 V Vertical Band Saw
  • Item # 21UN03
  • Mfr. Model # 21UN03
  • Vertical Band Saw, Cutting Capacity Rectangle 12 In. x 17-3/4 In., Cutting Capacity Round 12 In., Cutting...More

  • Category : Band Saws
Cast Aluminum NPT Threading Machine Die Head, 2-1/2"&#
  • TM

    Grainger Choice

  • WESTWARD
  • Cast Aluminum NPT Threading Machine Die Head, 2-1/2" to 4" Cast Aluminum NPT Threading Machine Die Head, 2-1/2" to 4"
  • Item # 34DA25
  • Mfr. Model # 34DA25
  • Threading Machine Die Head, Nominal Conduit/Pipe 2-1/2 In. to 4 In., For Use With 31XM65, Thread Type NPT,...More

  • Category : Pipe Threading Die Heads
Contractor Table Saw,14A,58-1/2 inW,110V
  • SAWSTOP
  • Contractor Table Saw, 14A, 58-1/2 inW, 110V Contractor Table Saw
  • Item # 46AC62
  • Mfr. Model # CNS175-SFA30
  • Contractor Table Saw, Blade Dia. 10 In., Arbor Size 5/8 In., Motor HP 1-3/4, Amps 14.0, No Load RPM 3450,...More

  • Category : Table Saws
Pedestal Belt Grinder,4.0 HP,440V
  • FEIN
  • Pedestal Belt Grinder, 4.0 HP, 440V Pedestal Belt Grinder,4.0 HP,440V
  • Item # 21VH72
  • Mfr. Model # GX 75
  • Pedestal Belt Grinder, 4.0 HP, Voltage 440.0, 6.8 Amps AC, 3 Phase, 60 Hz, Disc Dia. (In.) 3 x 79, Disc Speed...More

  • Category : Belt/Disc Sanders
Shear/Brake/Roll,20 Ga.
  • JET
  • Shear/Brake/Roll, 20 Ga. Shear/Brake/Roll,20 Ga.
  • Item # 42W893
  • Mfr. Model # 756041
  • Shear/Brake/Roll, Bending Length (In.) 40, Cutting Width (In.) 40, Rolls 3, Capacity of Mild Steel (Gauge)...More

  • Category : Metal Forming Machines
Results per page:  16 | 32 | 48
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More