Skip Content

Filter Results By

Applied Filters Clear All

Brand
  • View MoreView Less
Price
  • View MoreView Less
Shop By
Ratings

Power Tools

84 Results Found that Include 90 Products

Results per page: 16 | 32 | 48
Pipe Threading Machine,1/2 to 2 In
  • RIDGID
  • Pipe Threading Machine, 1/2 to 2 InPower Pipe Threading Machine
  • Item # 20KY54
  • Mfr. Model # 44923
  • Portable Pipe Threading Machine, Capacity 1/2 In. to 2 In., Reversing Yes, Overall Length 30 In., Overall...More

Magnetic Drill Press,500/250 RPM,1.25 In
  • MILWAUKEE
  • Magnetic Drill Press, 500/250 RPM, 1.25 InMagnetic Drill Press,500/250 RPM,1.25 In
  • Item # 4A940
  • Mfr. Model # 4208-1
  • Magnetic Drill Press, Voltage 120, Capacity Steel 1-1/4 In., 3 MT Spindle Taper, 11.5 Amps, No Load RPM...More

Walk Behind Concrete Saw,18 In,1.72 gal.
  • HUSQVARNA
  • Walk Behind Concrete Saw, 18 In, 1.72 gal.Walk Behind Concrete Saw
  • Item # 2LDU1
  • Mfr. Model # FS 400
  • Walk Behind Concrete Saw, Power Source 4 Cycle Gasoline Engine, Blade Dia. 18 In., Arbor Size 1 In., Depth of...More

Magnetic Drill Press,750/375 RPM,1.25 In
  • MILWAUKEE
  • Magnetic Drill Press, 750/375 RPM, 1.25 InMagnetic Drill Press,750/375 RPM,1.25 In
  • Item # 3TB70
  • Mfr. Model # 4209-1
  • Magnetic Drill Press, Voltage 120, Capacity Steel 1-1/4 In., 3 MT Spindle Taper, 11.5 Amps, No Load RPM...More

Horizontal/Vertical Band Saw,115/230V
  • JET
  • Horizontal/Vertical Band Saw, 115/230VVertical Band Saw
  • Item # 18F209
  • Mfr. Model # HVBS-7MW
  • Horizontal/Vertical Band Saw, Cutting Capacity Rectangle 7 In. x 10-7/8 In., Cutting Capacity Round 7 In.,...More

Floor Drill Press,16 In,1 HP,115V
  • OPTIMUM
  • Floor Drill Press, 16 In, 1 HP, 115VOPTIMUMBelt Floor Drill Press
  • Item # 5TPP7
  • Mfr. Model # B28H
  • Floor Drill Press, Drive Type Belt, Swing 15-3/4 In., Voltage 115, Motor HP 1, Chuck Size 5/8 In., Number of...More

Pavement Breaker,W/Truck,1 1/8,15A,120V
  • DEWALT
  • Pavement Breaker, W/Truck, 1 1/8,15A, 120VPavement Breaker,W/Truck,1 1/8,15A,120V
  • Item # 1TDA5
  • Mfr. Model # D25980KB
  • Pavement Breaker, Amps @ 120V 15.0, Impact Energy (Ft.-Lb.) 61.0, Blows per Minute 900, Drive System 1-1/8...More

Cordless Knockout Tool,18V,13-5/8 in. L
  • MILWAUKEE
  • Cordless Knockout Tool, 18V, 13-5/8 in. LCordless Knockout Tool,18V,13-5/8 in. L
  • Item # 31AD90
  • Mfr. Model # 2676-23
  • Cordless Knockout Tool, Battery Included, Voltage 18V, Max. Operating Force 10 tons, Max. Capacity Mild Steel...More

Horizontal Band Saw,Wet,115/230V,1 HP
  • DAYTON
  • Horizontal Band Saw, Wet, 115/230V, 1 HPHorizontal Band Saw
  • Item # 21UM99
  • Mfr. Model # BAND SAW 1
  • Horizontal Band Saw, Cutting Capacity Rectangle 7 In. x 8 In., Cutting Capacity Round 7 In., Cutting Capacity...More

Core Drill,Handheld Wet/Dry,1.5 HP,6 In
  • HUSQVARNA
  • Core Drill, Handheld Wet/Dry, 1.5 HP, 6 InCore Drill,Handheld Wet/Dry,1.5 HP,6 In
  • Item # 6PEV2
  • Mfr. Model # DM220
  • Handheld Wet/Dry Core Drill, Motor HP 1.5, Amps @ 120V 15, No Load RPM 950/2150/4500, Core Bit Cap Concrete...More

Tank Mixer,Gear Drive,1/2 HP,316 SS
  • DAYTON
  • Tank Mixer, Gear Drive, 1/2 HP, 316 SSTank Mixer,Gear Drive,1/2 HP,316 SS
  • Item # 32V140
  • Mfr. Model # 32V140
  • Tank Mixer, Gear Drive, Max. RPM 350, Shaft Dia. (In.) 3/4, Shaft Length (In.) 48, 1/2 HP, Motor 115 to 230V...More

Cordless Combination Kit,3.0A/hr.,18.0V
  • MAKITA
  • Cordless Combination Kit, 3.0A/hr., 18.0V18.0 Volt Cordless Combination Kit
  • Item # 14F155
  • Mfr. Model # LXT1500
  • Cordless Combination Kit,Voltage 18.0,Number of Tools 15,Tools Included Circular Saw, Cut Off Tool, Hammer...More

Pneumatic Press,Range 400 Lbs,7 In Swing
  • DAYTON
  • Pneumatic Press, Range 400 Lbs, 7 In SwingPneumatic Press,Range 400 Lbs,7 In Swing
  • Item # 4NHW5
  • Mfr. Model # 4NHW5
  • Pneumatic Press, Force in Tons 1/5, Force Range (Lbs.) 400, Swing (In.) 7, Table Work Surface (In.) 6 x...More

Copper Cutting/Prep Machine,1/2 to 2 In
  • RIDGID
  • Copper Cutting/Prep Machine, 1/2 to 2 InCopper Cutting/Prep Machine,1/2 to 2 In
  • Item # 3FE66
  • Mfr. Model # 93492
  • Copper Cutting/Prep Machine, Capacity Tube and Fitting 1/2 In. to 2 In., 1/3 HP, Reversing No, Overall Length...More

Diamond Coring Rig,2.9 Hp,120  V,15 A,
  • HUSQVARNA
  • Diamond Coring Rig, 2.9 Hp, 120 V, 15 A,Diamond Coring Rig,2.9 Hp,120 V,15 A,
  • Item # 3RDN7
  • Mfr. Model # DMS 240
  • Diamond Coring Rig, Motor HP 2.9, Amps @ 120V 19.3, No Load RPM 185/455, Core Bit Cap Concrete 10 In, Base...More

AVT Breaker Hammer 1 1/8 In Hex, 70 Lb.
  • MAKITA
  • AVT Breaker Hammer 1 1/8 In Hex, 70 Lb.AVT Breaker Hammer 1 1/8 In Hex, 70 Lb.
  • Item # 14F123
  • Mfr. Model # HM1810X3
  • Breaker Hammer, Amps @ 120V 15.0, Impact Energy (Ft.-Lb.) 46.5, Blows per Minute 1100, Drive System 1 1/8 In....More

Handheld Coring Drill,15 A,120V,Cap 6 In
  • HUSQVARNA
  • Handheld Coring Drill, 15 A, 120V, Cap 6 InHandheld Coring Drill,15 A,120V,Cap 6 In
  • Item # 2LEA5
  • Mfr. Model # DM230
  • Handheld Coring Drill, Motor HP 2.3, 15 Amps @ 120 V, No Load RPM 2900, Core Bit Cap Concrete 6 In., Tool...More

Demolition Hammer
  • BOSCH
  • Demolition HammerDemolition Hammer
  • Item # 21TY30
  • Mfr. Model # BH2770VCD
  • Demolition Hammer, Amps @ 120V 15.0, Impact Energy (Ft.-Lb.) 47, Blows per Minute 1000, Drive System 1-1/8...More

Drain Cleaning Machine,120VAC
  • WESTWARD
  • Drain Cleaning Machine, 120VACDrain Cleaning Machine
  • Item # 22XP40
  • Mfr. Model # 22XP40
  • Drain Cleaning Machine, Drain Line I.D. Size Range 4 In. to 8 In., Max. Run 125 ft., HP 2/3, Operating Speed...More

Arbor Press,3 Tons
  • DAKE CORPORATION
  • Arbor Press, 3 TonsArbor Press,3 Tons
  • Item # 40F022
  • Mfr. Model # 902002
  • Arbor Press, Force in Tons 3, Force Range (Lbs.) 0 to 6000, Swing (In.) 7, Table Work Surface (In.) 6.5 x...More

Belt Sander,6 X 48 In,1 1/2 HP,2850 SFPM
  • JET
  • Belt Sander, 6 X 48 In, 1 1/2 HP, 2850 SFPMBelt Sander,6 X 48 In,1 1/2 HP,2850 SFPM
  • Item # 3WRR3
  • Mfr. Model # J-4300A
  • Belt Sander, 1-1/2 HP, Voltage 115/230, 20/10 Amps AC, 1 Phase, 60 Hz, Disc Dia. (In.) -, Disc Speed (RPM) -,...More

Mill/Drill Machine, 1 HP
  • JET
  • Mill/Drill Machine, 1 HPMill/Drill Machine, 1 HP
  • Item # 18F193
  • Mfr. Model # JMD-15
  • , Swing 14-1/2 In., Motor HP 1 HP, 1 Phase, 115/230 V, 110-2,580 RPM, Chuck Size 1/2, Spindle Taper R-8,...More

Tank Mixer,Gear Drive,3/4 HP,316 SS
  • DAYTON
  • Tank Mixer, Gear Drive, 3/4 HP, 316 SSTank Mixer,Gear Drive,3/4 HP,316 SS
  • Item # 32V141
  • Mfr. Model # 32V141
  • Tank Mixer, Gear Drive, Max. RPM 350, Shaft Dia. (In.) 3/4, Shaft Length (In.) 60, 3/4 HP, Motor 115 to 230V...More

Cordless Combination Kit,15 Tools
  • MILWAUKEE
  • Cordless Combination Kit, 15 Tools18.0 Volt Cordless Combination Kit
  • Item # 32ZU71
  • Mfr. Model # 2695-15
  • Cordless Combination Kit,Voltage 18.0,Number of Tools 14,Tools Included Band Saw, Circular Saw, Cut Off Tool,...More

Masonry Saw,Wet Cut,Elctrc,14 In. Blade
  • HUSQVARNA
  • Masonry Saw, Wet Cut, Elctrc, 14 In. BladeMasonry Saw
  • Item # 18G366
  • Mfr. Model # MS 355
  • Masonry Saw, Cutting Type Wet, Power Source Electric, Blade Dia. 14 In., Arbor Hole 1 In., HP 1-1/2, Full...More

Horizontal Band Saw,3/4HP,220 V
  • JET
  • Horizontal Band Saw, 3/4HP, 220 VHorizontal Band Saw
  • Item # 42W920
  • Mfr. Model # J-3410-2
  • Horizontal Band Saw, Cutting Capacity Round 7 In., Cutting Capacity Square 7 In., Voltage 220, 3/4 HP, Speeds...More

Belt Grinder,5HP,230V,13A,6x79
  • OPTIMUM
  • Belt Grinder, 5HP, 230V, 13A, 6x79Belt Grinder,5HP,230V,13A,6x79
  • Item # 5PHE2
  • Mfr. Model # BSM150
  • Belt Grinder, 5 HP, Voltage 230, 13 Amps AC, 3 Phase, 60 Hz, Disc Dia. (In.) NA, Disc Speed (RPM) NA, Belt...More

Planer,3 HP,15 A
  • JET
  • Planer, 3 HP, 15 APlaner,3 HP,15 A
  • Item # 42W897
  • Mfr. Model # JWP-16OS
  • Planer,4500 rpm Speed,Motor HP 3,15 Amps,Cutting Width (In.) 16,Cutting Thickness (In.) 6-3/8,Depth of Cut...More

  • VENTMASTER
  • Rotary SawRotary Saw
  • Multiple product options available

    Multiple product options available

Vertical Band Saw,115/230V,1 HP,15 in.
  • DAYTON
  • Vertical Band Saw, 115/230V, 1 HP, 15 in.Vertical Band Saw,115/230V,1 HP,15 in.
  • Item # 49G988
  • Mfr. Model # 49G988
  • Vertical Band Saw, Cutting Capacity Rectangle 10 In. x 15 In., Cutting Capacity Round 10 In., Cutting...More

Mill/Drill,14 In,3/4HP,110V,115-2600 Sp
  • DAYTON
  • Mill/Drill, 14 In, 3/4HP, 110V, 115-2600 SpMill/Drill,14 In,3/4HP,110V,115-2600 Sp
  • Item # 2LKP8
  • Mfr. Model # 2LKP8
  • Mill/Drill Machine, Swing 16 In., Motor HP 3/4, 1 Phase, 115/230, 60 Hz, 115 to 2580 RPM, R8 Spindle, Spindle...More

Rebar Cutter Kit,12 Amps,1 In Cap
  • BN PRODUCTS USA
  • Rebar Cutter Kit, 12 Amps, 1 In CapRebar Cutter Kit,12 Amps,1 In Cap
  • Item # 10H744
  • Mfr. Model # DC-25X
  • Rebar Cutter, 12 Amps @ 120V, Max. Capacity (In.) 1, Blade Type Alloy Steel Cutting Blocks, Bearing Type...More

Results per page: 16 | 32 | 48