Skip Content

Filter Results By

Applied Filters Clear All

Brand
  • View MoreView Less
Price
  • View MoreView Less
Shop By
Ratings

Power Tools

61 Results Found that Include 69 Products 

Results per page: 16 | 32 | 48
Pipe Thread Ratchet
  • RIDGID
  • Pipe Thread Ratchet
  • Item # 6YJ38
  • Mfr. Model # 36620
  • Receding Geared Threader, Nominal Conduit/Pipe 2-1/2 In. to 4 In., Thread Type NPT, Die Material/Type High...More

Drain Cleaning Machine, 3/4x100, 5/8x125
  • RIDGID
  • Drain Cleaning Machine, 3/4x100, 5/8x125
  • Item # 1ATH5
  • Mfr. Model # 42007
  • Drain Cleaning Machine, Drain Line I.D. Size Range 3 In. to 8 In., Max. Run 200 ft., HP 3/4, Operating Speed...More

Belt/Disc Sander,12 In Disc,6 x 48 Belt
  • JET
  • Belt/Disc Sander, 12 In Disc, 6 x 48 Belt
  • Item # 3WRR2
  • Mfr. Model # J-4200A
  • Belt/Disc Sander, 1-1/2 HP, Voltage 115, 20/10 Amps AC, 1 Phase, 60 Hz, Disc Dia. (In.) 12, Disc Speed (RPM)...More

Cold Saw,14 In. Blade,1-1/4 In. Arbor
  • OPTIMUM
  • Cold Saw, 14 In. Blade, 1-1/4 In. Arbor
  • Item # 5TNZ5
  • Mfr. Model # CS350
  • Cold Saw, Voltage 120, Blade Dia. 14 In., Arbor Size 1-1/4 In., 62 to 125 No Load RPM, 6 Amps, Cutting...More

Cordless Cable Crimping Tool Kit
Coring Rig Dymodrill,20.0 A
  • MILWAUKEE
  • Coring Rig Dymodrill, 20.0 A
  • Item # 38D748
  • Mfr. Model # 4120-22
  • Coring Rig Dymodrill, Motor HP 4.8, Amps @ 120V 20.0, No Load RPM 450/900, Core Bit Cap Concrete (In.)...More

Belt/Disc Sander,2 HP,230/460V
  • POWERMATIC
  • Belt/Disc Sander, 2 HP, 230/460V
  • Item # 42W957
  • Mfr. Model # 31A
  • Belt/Disc Sander, 2 HP, Voltage 230/460, 6.8 Amps AC, 3 Phase, 60 Hz, Disc Dia. (In.) 12, Disc Speed (RPM)...More

  • JET
  • Vertical Band Saw
  • Multiple product options available

Floor Drill Press,22 In,3 HP,230V
  • OPTIMUM
  • Floor Drill Press, 22 In, 3 HP, 230V
  • Item # 5TPP9
  • Mfr. Model # B34H
  • Floor Drill Press, Drive Type Belt, Swing 22 In., Voltage 230, Motor HP 3, Chuck Size 5/8 In., Number of...More

Pneumatic Press,Range 1000 Lbs,8.5 Swing
  • DAYTON
  • Pneumatic Press, Range 1000 Lbs, 8.5 Swing
  • Item # 4NHW6
  • Mfr. Model # 4NHW6
  • Pneumatic Press, Force in Tons 1/2, Force Range (Lbs.) 1000, Swing (In.) 8-1/2, Table Work Surface (In.) 7 x...More

Open Jaw Cordless Crimping Kit
Knockout Punch Driver Set,Battery,11 Pc
  • GREENLEE
  • Knockout Punch Driver Set, Battery, 11 Pc
  • Item # 40H693
  • Mfr. Model # LS50L11SP
  • Knockout Punch Driver Set, Battery-Powered, Number of Pieces 10, Max. Capacity Mild Steel (Ga.) 10, Capacity...More

Magnetic Drill Press Kit,Var 2 Sp
  • JANCY
  • Magnetic Drill Press Kit, Var 2 Sp
  • Item # 4KYP1
  • Mfr. Model # 17985
  • Magnetic Drill Press Kit, Voltage 120, Capacity Steel 4 In., 3 MT Spindle Taper, 11.7 Amps, No Load RPM...More

Horizontal Band Saw,1 PH,7 In
  • DAKE CORPORATION
  • Horizontal Band Saw, 1 PH, 7 In
  • Item # 40F055
  • Mfr. Model # 983100
  • Horizontal Band Saw, Cutting Capacity Rectangle 7 In. x 12 In., Cutting Capacity Round 7 In., Cutting...More

Horizontal Band Saw,Dry,115/230V,1 HP
  • JET
  • Horizontal Band Saw, Dry, 115/230V, 1 HP
  • Item # 18F212
  • Mfr. Model # HBS-710S
  • Horizontal Band Saw, Cutting Capacity Rectangle 8 In. x 11-1/4 In., Cutting Capacity Round 5 In., Cutting...More

Shear Brake Roll, 3 in 1, 52 In, Steel
  • BAILEIGH INDUSTRIAL
  • Shear Brake Roll, 3 in 1, 52 In, Steel
  • Item # 15V785
  • Mfr. Model # SBR-5216
  • 3 in 1 Shear Brake Roll, Length of Cut (In.) 52, Capacity of Mild Steel (Gauge) 16, Length of Blade (In.) 52,...More

Panel Saw,8 In.,5800 rpm,Cut H 64 In.
  • SAFETY SPEED
  • Panel Saw, 8 In., 5800 rpm, Cut H 64 In.
  • Item # 34C051
  • Mfr. Model # H5
  • Panel Saw, Blade Dia. 8 In., No Load RPM 5800, Voltage 120, Amps @ 120V 15.0, Cutting Height 64 In., Cutting...More

  • ICS
  • Concrete Chain Saw
  • Multiple product options available

Slip Roll Bench, 50 x 16 In
  • JET
  • Slip Roll Bench, 50 x 16 In
  • Item # 18F208
  • Mfr. Model # SR-1650M
  • Slip Roll, Max. Forming Width (In.) 50, Max. Capacity 16 Ga., Dia. of Rolls (In.) 3, Min. Radius (In.) 2

Planer 12-1/4, 15 A
  • MAKITA
  • Planer 12-1/4, 15 A
  • Item # 14F144
  • Mfr. Model # KP312
  • Planer, 12000 Speed, 15 A Amps @ 120V, Cutting Width (In.) 12 1/4, Depth of Cut (In.) 1/8 In., No Load RPM...More

Horizontal Band Saw,Wet,115/230V,1.5 HP
  • DAYTON
  • Horizontal Band Saw, Wet, 115/230V, 1.5 HP
  • Item # 21UN01
  • Mfr. Model # BAND SAW 2
  • Horizontal Band Saw, Cutting Capacity Rectangle 8 In. x 11-1/4 In., Cutting Capacity Round 8 In., Cutting...More

Industrial Belt Finishing Machine,230V
  • JET
  • Industrial Belt Finishing Machine, 230V
  • Item # 42W965
  • Mfr. Model # J-4301A
  • Industrial Belt Finishing Machine, 1-1/2 HP, Voltage 230, 6 Amps AC, 3 Phase, 60 Hz, Belt Size (In.) 6 x 48,...More

Diamond Coring Rig with Stand,120V
  • MILWAUKEE
  • Diamond Coring Rig with Stand, 120V
  • Item # 38D746
  • Mfr. Model # 4115-22
  • Diamond Coring Rig with Stand, Motor HP 4.8, Amps @ 120V 20.0, No Load RPM 450/900, Core Bit Cap Concrete...More

Punch Driver Kit,Battery,14 ga Steel,6Pc
  • GREENLEE
  • Punch Driver Kit, Battery, 14 ga Steel, 6Pc
  • Item # 15X779
  • Mfr. Model # LS50L11A
  • Punch Driver Kit, Battery-Powered, Number of Pieces 6, Max. Capacity Mild Steel (Ga.) 14, Capacity 6 tons,...More

Pavmt Brkr W/Addl Combo Kit,20 V
Disc Sander,20 In,3 HP,220V,3 Ph
  • DAYTON
  • Disc Sander, 20 In, 3 HP, 220V, 3 Ph
  • Item # 2XTG6
  • Mfr. Model # 2XTG6
  • Disc Sander, 3 HP, Voltage 220, 9.6 Amps AC, 3 Phase, 60 Hz, Disc Dia 20 In, Disc Speed 1720 RPM, Table Work...More

Shear Wrench,120VAC,12 Amps,5/8,3/4,7/8"
  • MAKITA
  • Shear Wrench, 120VAC, 12 Amps, 5/8,3/4,7/8"
  • Item # 4DZJ2
  • Mfr. Model # 6922NB
  • Shear Wrench, Drive Size 5/8, 3/4, 7/8 In., Max. Torque 600 ft.-lb., Blows per Minute 0 to 2700, No Load RPM...More

  • PACKERS KROMER
  • Tool Balancer
  • Multiple product options available

Cordless Cable Cutter,14.4V NiCd
  • GREENLEE
  • Cordless Cable Cutter, 14.4V NiCd
  • Item # 15X817
  • Mfr. Model # ES100011
  • Cordless Cable Cutter, Battery Included, Voltage 14.4V, Cutting Capacity/Material 1000 MCM Copper, 1000 MCM...More

Disc Sander,20 In,2 HP,240V,1 Ph
  • DAYTON
  • Disc Sander, 20 In, 2 HP, 240V, 1 Ph
  • Item # 2XTG5
  • Mfr. Model # 2XTG5
  • Disc Sander, 2 HP, Voltage 240, 10 Amps AC, 1 Phase, 60 Hz, Disc Dia 20 In, Disc Speed 1720 RPM, Table Work...More

Rebar Cutter And  Bender,5/8 In,180 Deg
  • HITACHI
  • Rebar Cutter And Bender, 5/8 In, 180 Deg
  • Item # 2CYD8
  • Mfr. Model # VB16Y
  • Rebar Cutter And Bender, Amps @120V 8, Max. Capacity 5/8 In., Bend Angle 180 Deg., (2) Cutter Blade Type,...More

Edger Floor Sander,7 In,13500 RPM
  • HIRETECH
  • Edger Floor Sander, 7 In, 13500 RPM
  • Item # 1YMR5
  • Mfr. Model # 7004
  • Edger Floor Sander, Machine Size 7 In., Speed 13,500 rpm, Cord Length 23 ft., Sound Level 100dB @ 1m, Power...More

Results per page: 16 | 32 | 48