Skip Content

Filter Results By

Applied Filters Clear All

Brand
Price
Shop By
Ratings

Machining

1,371 Results Found that Include 1,483 Products

Product availability based on selecting either shipping or pick up and a location. Dismiss
Results per page:  16 | 32 | 48
Downdraft Table, Table Size: 24" x 24", 120
Angular Vise 2Way,Jaw 6 In,Jaw Open 6In
  • DAYTON
  • Angular Vise 2Way, Jaw 6 In, Jaw Open 6In Angular Machine Vise 2 Way
  • Item # 4CPF2
  • Mfr. Model # 4CPF2
  • 2 Way Angular Machine Vise, Swivel Base, Jaw Width 6 In, Jaw Opening 6 In, Throat Depth 1 3/4 In, Overall...More

Digital Durometer,Shore D,0.71 In Dia
  • MITUTOYO
  • Digital Durometer, Shore D, 0.71 In Dia Digital Durometer,Shore D,0.71 In Dia
  • Item # 1ARV5
  • Mfr. Model # 811-334-10
  • Handheld Digital Durometer, Shore D, Range 20-90, Indenter Sharp Point, LCD Display, SPC Output, Functions...More

Tapping Head,#3 JT,1200 RPM,#10-3/4-16
High Speed Steel Tap and Die Set, SAE, Number of
  • WESTWARD
  • High Speed Steel Tap and Die Set, SAE, Number of Pieces: 110 High Speed Steel Tap and Die Set, SAE, Number of Pieces: 110
  • Item # 1PZ38
  • Mfr. Model # 1PZ38
  • Tap and Die Set, SAE, High Speed Steel, Number of Pieces 110, Cutting Sizes 35, Die Type 1 In. and 1-1/2 In....More

Press Accessory Set, 8 Pieces
  • HEIN-WERNER
  • Press Accessory Set, 8 Pieces Press Accessory Set, 8 Pieces
  • Item # 12G741
  • Mfr. Model # HW93309
  • Press Accessory Set, Steel, Length (In.) 19-1/2, Width (In.) 17-1/4, Height (In.) 8, For Use With 25 Ton...More

Electronic Digital Height Gage, 0 to 24"/0 to 600
Jobber Drill Bit Set, Cobalt Steel, Fractional Inch, Letter
Dust Collector
  • DAYTON
  • Dust Collector Dust Collector
  • Item # 3AA21
  • Mfr. Model # 3AA21
  • Dust Collector, Two Stage Portable, 3-Phase, 2 HP, 230/460V Voltage, 60 Hz, 3, 5.2 Amps AC, 83 dBA, 5 micron...More

Slotted Shim Asst,SS,5 x 5 In,260 PC
  • GRAINGER APPROVED
  • Slotted Shim Asst, SS, 5 x 5 In, 260 PC Slotted Shim Asst,SS,5 x 5 In,260 PC
  • Item # 36D706
  • Mfr. Model # 36D706
  • Slotted Shim Kit, With Tab, 302/304 Stainless Steel, Size D-5 In.x5 In., Temper Full Hard for 302 SS and...More

Milling Machine Starter Kit,R 8,99 Pc
  • DAYTON
  • Milling Machine Starter Kit, R 8,99 Pc Milling Machine Starter Kit,R 8,99 Pc
  • Item # 4LEY1
  • Mfr. Model # 4LEY1
  • Milling Machine Starter Kit, 99 Pieces, Includes 10 Piece 4 flute HSS End Mill Kit With Case 3/16 In To 3/4...More

High Speed Steel Tap and Die Set, Metric, Number of&#x
Digital Outside Micrometer Set, Micrometers Included: 1, 2,
Electronic Digital Height Gage, 0 to 12"/0 to 300
Vac Blaster,1100W,120V,1.5 HP,50 lb. Cap
  • ALLSOURCE
  • Vac Blaster, 1100W, 120V, 1.5 HP, 50 lb. Cap ALLSOURCE Abrasive Blasters
  • Item # 22PT28
  • Mfr. Model # 41700
  • Vacuum Blaster, 1100 Watt, 120 Volt, 1.5 HP, Hopper Capacity (Lb.) 50, Hopper Material Steel, Tank Dimension...More

Digital Caliper, 0.0005"/0.01mm Resolution
  • STARRETT
  • Digital Caliper, 0.0005"/0.01mm Resolution Digital Calipers
  • Item # 2ZUG3
  • Mfr. Model # 799AZ-24/600
  • Digital Caliper, Resolution 0.0005 In./0.01mm, Jaw Depth 4 In., SPC Output No, Long Form Calibration...More

Pressure Blaster,150 lb Capacity
  • ALC
  • Pressure Blaster, 150 lb Capacity ALC Abrasive Blasters
  • Item # 15E743
  • Mfr. Model # 40004
  • Portable Pressure Blaster, Deadman, Hopper Capacity (Lb.) 150Tank Dimension (In.) 10 x 25, Steel, Air...More

Drill Sharpener,Multi Angle,115V
  • OPTIMUM
  • Drill Sharpener, Multi Angle, 115V Drill Sharpener,Multi Angle,115V
  • Item # 5TPR6
  • Mfr. Model # DG20
  • Drill Sharpener Multi Angle, Drill Dia./Capacity 7/64" to 13/16", Max. RPM 9120, Voltage 115, 11 Amps, 0.80...More

Digital Durometer,Shore A,1.73 x 0.71 In
  • MITUTOYO
  • Digital Durometer, Shore A, 1.73 x 0.71 In Digital Durometer,Shore A,1.73 x 0.71 In
  • Item # 1ZRT4
  • Mfr. Model # 811-336-10
  • Handheld Digital Durometer, Shore A, Range 10-90, Indenter Blunt Taper, LCD Display, SPC Output, Functions...More

Rotary Cross Slide Table,8 In
  • PALMGREN
  • Rotary Cross Slide Table, 8 In Rotary Cross Slide Table,8 In
  • Item # 19F408
  • Mfr. Model # 32803
  • Rotary Table, Cross Slide, Number of Pieces 1, 5/8 In. T-Slots, Capacity 8 In., Cast Iron, For Use With Drill...More

Micrometer Set, IP65, Micrometers Included: 1, 2, 3, 4
Coolant,54 gal,Drum
  • TRIM
  • Coolant, 54 gal, Drum Semi-Synthetic Coolant
  • Item # 5CEY0
  • Mfr. Model # SC520
  • Coolants, Semi-Synthetic Coolant, SC520, 54 gal., Drum, Light Blue, Fragrance Mild Odor, Low Odor, Specific...More

Dial Bore Gage, 0.7 to 6 Measuring Range (In.),&#
Adaptor,CoroBore XL,C8-R822XLS17-AL 070
  • SANDVIK COROMANT
  • Adaptor, CoroBore XL, C8-R822XLS17-AL 070 Adaptor,CoroBore XL,C8-R822XLS17-AL 070
  • Item # 29VY59
  • Mfr. Model # C8-R822XLS17-AL 070
  • Dampened Boring, CoroBore XL, 825D-215TC11-C8, Diameter 3.150 In., 15.748 In. Cutting Length, 1 Number of...More

CoroTurn SL,C5-570-3C25133
  • SANDVIK COROMANT
  • CoroTurn SL, C5-570-3C25133 CoroTurn SL,C5-570-3C25133
  • Item # 5KKF9
  • Mfr. Model # C5-570-3C 25 133
  • CoroTurn SL, Nomenclature C5-570-3C25133, Style C5-5, Left/Right Hand N, Min Bore 1.2598 In, Shank Material...More

Sq Shoulder Mill Cut,RA590-076R25A-11M
  • SANDVIK COROMANT
  • Sq Shoulder Mill Cut, RA590-076R25A-11M Sq Shoulder Mill Cut,RA590-076R25A-11M
  • Item # 5AXT0
  • Mfr. Model # RA590-076R25A-11M
  • Square Shoulder Mill Cutter, CoroMill 590, Cutting Dia. 3.00 In, Mounting Style Arbor, Mounting Size 1 In,...More

Boring Head,EH16-R825A-AA18014
  • SANDVIK COROMANT
  • Boring Head, EH16-R825A-AA18014 Boring Head,EH16-R825A-AA18014
  • Item # 30AD87
  • Mfr. Model # EH16-R825A-AA18014
  • Boring Head, CoroBore 825, For Use With Coromant Capto EH16 Adapters, CoroBore R825 Cartridges,...More

Results per page:  16 | 32 | 48
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More