Skip Content

Filter Results By

Applied Filters Clear All

Brand
Price
Shop By

Machining

120 Results Found that Include 136 Products

Product availability based on selecting either shipping or pick up and a location. Dismiss
Results per page: 16 | 32 | 48
Drill Bit Case,115 Compartment,3-in-1
  • CHICAGO-LATROBE
  • Drill Bit Case, 115 Compartment, 3-in-1Drill Bit Case,115 Compartment,3-in-1
  • Item # 4EJ48
  • Mfr. Model # 57810
  • Drill Bit Case, Jobber Length 3-in-1, Holds #1 to 60 Wire Gage, 1/16 to 1/2 In Fractions by 64ths and Letters...More

Bench Edge Finishing Machine,7 In
  • DAYTON
  • Bench Edge Finishing Machine, 7 InBench Edge Finishing Machine,7 In
  • Item # 2KVZ6
  • Mfr. Model # 2KVZ6
  • Bench Edge Finishing Machine, 3/4 HP, Voltage 110, 1 Phase, Wheel Dia. 7 In., Dust Collection No, 9 Amps,...More

Integrated Die/Die Stock,12mmx1.75mm
Integrated Die/Die Stock,10mmx1.50mm
Arbor Spacer,5/8 ID,0.118-0.236 In T
  • DAYTON
  • Arbor Spacer, 5/8 ID, 0.118-0.236 In TArbor Spacer,5/8 ID,0.118-0.236 In T
  • Item # 1LNE6
  • Mfr. Model # 1LNE6
  • Arbor Spacer Kit, Stamped Steel, Full Hard Temper, Thickness 0.118 to 0.236 In, Thickness 3 to 6 mm,...More

Carb End Mill,3/4 In,3FL,CC,Uncoated
  • MICRO 100
  • Carb End Mill, 3/4 In, 3FL, CC, UncoatedCarb End Mill,3/4 In,3FL,CC,Uncoated
  • Item # 14T144
  • Mfr. Model # GEC-750-3-125
  • Carbide End Mill, C2 Micro Grain, Finishing and Roughing, Diameter 3/4 In, End Style Corner Radius, Single...More

Sharpening Station,120V,4800 rpm
  • DREMEL
  • Sharpening Station, 120V, 4800 rpmSharpening Station,120V,4800 rpm
  • Item # 38EY43
  • Mfr. Model # 6700-01
  • Sharpening Station, Voltage 120, 0.3 Amps AC, 4800 RPM, Features Magnetic Blade Holder and Spark Guard,...More

Sp Flute Tap,Semi-Bott,1/4 Inx28,Bright
  • SANDVIK COROMANT
  • Sp Flute Tap, Semi-Bott, 1/4 Inx28, BrightHigh Speed Steel-PM Spiral Flute Tap, Bright Finish
  • Item # 25H336
  • Mfr. Model # EP301/4
  • Spiral Flute Tap, Right Hand, Tap Style Semi-Bottoming, Size 1/4 In., Pitch 28, Material High Speed Steel-PM,...More

End Mill,Roughing,Co,2 In,8 FL,Sq End
  • NIAGARA CUTTER
  • End Mill, Roughing, Co, 2 In, 8 FL, Sq EndEnd Mill,Roughing,Co,2 In,8 FL,Sq End
  • Item # 2PVY1
  • Mfr. Model # 44597
  • End Mill, Roughing, Fine Pitch, General Purpose, Number of Flutes 8, Single End, Square End Style, Non-Center...More

Hex Rethreading Bolt Die,Steel,5/16,24
End Mill,Roughing,Co,7/8,5 FL,SGL Sq End
  • NIAGARA CUTTER
  • End Mill, Roughing, Co, 7/8,5 FL, SGL Sq EndEnd Mill,Roughing,Co,7/8,5 FL,SGL Sq End
  • Item # 2PVN1
  • Mfr. Model # 44537
  • End Mill, Roughing, Fine Pitch, General Purpose, Number of Flutes 5, Single End, Square End Style, Non-Center...More

End Mill,Roughing,TiN,1 1/2,6 FL,Sq End
  • NIAGARA CUTTER
  • End Mill, Roughing, TiN, 1 1/2,6 FL, Sq EndEnd Mill,Roughing,TiN,1 1/2,6 FL,Sq End
  • Item # 2PUR5
  • Mfr. Model # 71483
  • End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style,...More

End Mill,Roughing,Co,1 1/4,6 FL,Sq End
  • NIAGARA CUTTER
  • End Mill, Roughing, Co, 1 1/4,6 FL, Sq EndEnd Mill,Roughing,Co,1 1/4,6 FL,Sq End
  • Item # 2PTV4
  • Mfr. Model # 71403
  • End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style,...More

Hex Rethreading Bolt Die,Steel,1,12
End Mill,Carbide,EXO,0.5mm,2 FL,Sq End
  • OSG
  • End Mill, Carbide, EXO, 0.5mm, 2 FL, Sq EndEnd Mill,Carbide,EXO,0.5mm,2 FL,Sq End
  • Item # 2TWK1
  • Mfr. Model # 3020504
  • End Mill, Rib Processing, High Performance, Number of Flutes 2, Single End, Square End Style, Center Cutting...More

Carbide End Mill,Dia 18.0mm,Cut L 45mm
  • MICRO 100
  • Carbide End Mill, Dia 18.0mm, Cut L 45mmCarbide End Mill,Dia 18.0mm,Cut L 45mm
  • Item # 16E761
  • Mfr. Model # AEMM-180-4X
  • Carbide End Mill, Type Finishing and Roughing, End Style Square, End Single, Length of Cut 45mm, Overall...More

Knob,Four Prong,Stud
Drill - 2 Fl Jobber Length,9/64
  • MICRO 100
  • Drill - 2 Fl Jobber Length, 9/64Drill - 2 Fl Jobber Length,9/64
  • Item # 16T547
  • Mfr. Model # DR-140-2
  • Jobber Length Drill Bit, Grade C2 Micro Grain, Solid Carbide, Uncoated Finish, Drill Point 118 Deg.,...More

Taper Length Drill,List# 535,1.67 mm
  • GUHRING
  • Taper Length Drill, List# 535,1.67 mmTaper Length Drill,List# 535,1.67 mm
  • Item # 10A737
  • Mfr. Model # 9005350016700
  • Taper Length Drill, Parabolic, List Number 535, Number of Pieces 1, High Performance Grade, High Speed Steel,...More

Hex Rethreading Bolt Die,Steel,1 1/8,7
End Mill,Roughing,Co,TiCN,1 In,5 FL,Sq
  • NIAGARA CUTTER
  • End Mill, Roughing, Co, TiCN, 1 In, 5 FL, SqEnd Mill,Roughing,Co,TiCN,1 In,5 FL,Sq
  • Item # 2PWF9
  • Mfr. Model # 79610
  • End Mill, Roughing, Fine Pitch, General Purpose, Number of Flutes 5, Single End, Square End Style, Non-Center...More

Rd Adjustable Die,HSS,3/8,16
  • WIDIA GTD
  • Rd Adjustable Die, HSS, 3/8,16Rd Adjustable Die,HSS,3/8,16
  • Item # 4AKP9
  • Mfr. Model # 23751
  • Round Adjustable Die, High Speed Steel, Size 3/8, Pitch 16, NC, Outside Dia 1 In, Thickness 3/8 In, For...More

Hex Rethreading Bolt Die,Steel,9/16,18
Carb End Mill,3/4 In,3FL,CC,Uncoated
  • MICRO 100
  • Carb End Mill, 3/4 In, 3FL, CC, UncoatedCarb End Mill,3/4 In,3FL,CC,Uncoated
  • Item # 14T138
  • Mfr. Model # GEC-750-3-030
  • Carbide End Mill, C2 Micro Grain, Finishing and Roughing, Diameter 3/4 In, End Style Corner Radius, Single...More

Torx Screw,T-20
End Mill,Roughing,TiN,1 3/4,6 FL,Sq End
  • NIAGARA CUTTER
  • End Mill, Roughing, TiN, 1 3/4,6 FL, Sq EndEnd Mill,Roughing,TiN,1 3/4,6 FL,Sq End
  • Item # 2PUT1
  • Mfr. Model # 72560
  • End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style,...More

End Mill,Carbide,EXO,8.0mm,2 FL,Sq End
  • OSG
  • End Mill, Carbide, EXO, 8.0mm, 2 FL, Sq EndEnd Mill,Carbide,EXO,8.0mm,2 FL,Sq End
  • Item # 2TWJ1
  • Mfr. Model # 8519080
  • End Mill, Standard, High Performance, Number of Flutes 2, Single End, Square End Style, Center Cutting Type,...More

Carb End Mill,15/64 In,4FL,CC,Uncoated
  • MICRO 100
  • Carb End Mill, 15/64 In, 4FL, CC, UncoatedCarb End Mill,15/64 In,4FL,CC,Uncoated
  • Item # 14F978
  • Mfr. Model # GEM-234-4
  • Carbide End Mill, C2 Micro Grain, Finishing and Roughing, Diameter 15/64 In, End Style Square, Single End,...More

Results per page: 16 | 32 | 48
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More