Skip Content

Filter Results By

Applied Filters Clear All

Brand
  • View MoreView Less
Price
  • View MoreView Less
Shop By

Machining

126 Results Found that Include 148 Products

Results per page: 16 | 32 | 48
Tool Sharpener,8 In
  • SCHEPPACH
  • Tool Sharpener, 8 InTool Sharpener,8 In
  • Item # 15D999
  • Mfr. Model # 15D999
  • Tool Sharpener, Wet Wheel, Motor HP 1/6, Single Phase, Voltage 120, H60 Hz, 2.0 Amps AC, 120 RPM, 220 Grit,...More

Bench Edge Finishing Machine,7 In
  • DAYTON
  • Bench Edge Finishing Machine, 7 InBench Edge Finishing Machine,7 In
  • Item # 2KVZ6
  • Mfr. Model # 2KVZ6
  • Bench Edge Finishing Machine, 3/4 HP, Voltage 110, 1 Phase, Wheel Dia. 7 In., Dust Collection No, 9 Amps,...More

Integrated Die/Die Stock,3/8-16
  • WESTWARD
  • Integrated Die/Die Stock, 3/8-16Integrated Die/Die Stock,3/8-16
  • Item # 2PCL6
  • Mfr. Model # 2PCL6
  • Integrated Die/Die Stock, High Speed Steel, Right, Size 3/8 In, Pitch 16, NC, Outside Dia 1 3/8 In, Thickness...More

Arbor Spacer,5/8 ID,0.118-0.236 In T
  • DAYTON
  • Arbor Spacer, 5/8 ID, 0.118-0.236 In TArbor Spacer,5/8 ID,0.118-0.236 In T
  • Item # 1LNE6
  • Mfr. Model # 1LNE6
  • Arbor Spacer Kit, Stamped Steel, Full Hard Temper, Thickness 0.118 to 0.236 In, Thickness 3 to 6 mm,...More

Integrated Die/Die Stock,3mmx0.5mm
Integrated Die/Die Stock,10mmx1.50mm
Integrated Die/Die Stock,#10-32
  • WESTWARD
  • Integrated Die/Die Stock, #10-32Integrated Die/Die Stock,#10-32
  • Item # 2PCN3
  • Mfr. Model # 2PCN3
  • Integrated Die/Die Stock, High Speed Steel, Right, Size #10, Pitch 32, NF, Outside Dia 1 3/8 In, Thickness...More

Integrated Die/Die Stock,12mmx1.75mm
Carb End Mill,3/4 In,3FL,CC,Uncoated
  • MICRO 100
  • Carb End Mill, 3/4 In, 3FL, CC, UncoatedCarb End Mill,3/4 In,3FL,CC,Uncoated
  • Item # 14T138
  • Mfr. Model # GEC-750-3-030
  • Carbide End Mill, C2 Micro Grain, Finishing and Roughing, Diameter 3/4 In, End Style Corner Radius, Single...More

End Mill,Roughing,Co,1 3/4,6 FL,Sq End
  • NIAGARA CUTTER
  • End Mill, Roughing, Co, 1 3/4,6 FL, Sq EndEnd Mill,Roughing,Co,1 3/4,6 FL,Sq End
  • Item # 2PTX6
  • Mfr. Model # 71564
  • End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style,...More

Carb End Mill,3/4 In,3FL,CC,Uncoated
  • MICRO 100
  • Carb End Mill, 3/4 In, 3FL, CC, UncoatedCarb End Mill,3/4 In,3FL,CC,Uncoated
  • Item # 14T142
  • Mfr. Model # GEC-750-3-090
  • Carbide End Mill, C2 Micro Grain, Finishing and Roughing, Diameter 3/4 In, End Style Corner Radius, Single...More

Carbide Turning Insert,CNMG 543-PR 4225
  • SANDVIK COROMANT
  • Carbide Turning Insert, CNMG 543-PR 42255/8" Inscribed Circle, CNMG, 80 Degrees Diamond, Carbide Turning Insert
  • Item # 4MDZ9
  • Mfr. Model # CNMG 543-PR 4225
  • Carbide Turning Insert, 0 Degrees , 80 Degrees Diamond, Style CNMG, Insert Size 543, Chip-Breaker PR, Grade...More

Drill Bit Case,Jobber,Holds #1-60 Wire
  • CHICAGO-LATROBE
  • Drill Bit Case, Jobber, Holds #1-60 WireDrill Bit Case,Jobber,Holds #1-60 Wire
  • Item # 3BP52
  • Mfr. Model # 57806
  • Drill Bit Case, Jobber Length, Holds #1-60 Wire Gage, Steel, Overall Case Width 3 9/16 In, Overall Case Depth...More

Hex Rethreading Bolt Die,Steel,1/4,28
Sp Flute Tap,Semi-Bott,M42x4.50mm,Bright
  • SANDVIK COROMANT
  • Sp Flute Tap, Semi-Bott, M42x4.50mm, BrightHigh Speed Steel-E Cobalt Spiral Flute Tap, Bright Finish
  • Item # 25H421
  • Mfr. Model # EX00M42
  • Spiral Flute Tap, Right Hand, Tap Style Semi-Bottoming, Size M42, Pitch 4.50mm, Material High Speed Steel-E...More

Swivel Caster
Hex Rethreading Bolt Die,Steel,9/16,12
Hex Rethreading Bolt Die,Steel,5/16,18
Sp Pt Tap,Plug,M30x3.50mm,S/O
  • SANDVIK COROMANT
  • Sp Pt Tap, Plug, M30x3.50mm, S/OSp Pt Tap,Plug,M30x3.50mm,S/O
  • Item # 25H097
  • Mfr. Model # EP01M30
  • Spiral Point Tap, Right Hand, Tap Style Plug, Size M30, Pitch 3.50mm, Material High Speed Steel-E Cobalt,...More

End Mill,Roughing,Co,1 3/4,6 FL,Sq End
  • NIAGARA CUTTER
  • End Mill, Roughing, Co, 1 3/4,6 FL, Sq EndEnd Mill,Roughing,Co,1 3/4,6 FL,Sq End
  • Item # 2PVU6
  • Mfr. Model # 45487
  • End Mill, Roughing, Fine Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style, Non-Center...More

Handle,Tapered
  • CARR LANE
  • Handle, TaperedHandle,Tapered
  • Item # 4X481
  • Mfr. Model # CL-1-PH
  • Tapered Handle, Thread Size 1/4-20 Inch, Diameter 1 Inch, 2 5/8 Inches Length, Tapped, Phenolic Plastic

Hex Rethreading Bolt Die,Steel,9/16,18
Screw Extractor,1/4-5/16 In
Carbide End Mill,Dia 18.0mm,Cut L 45mm
  • MICRO 100
  • Carbide End Mill, Dia 18.0mm, Cut L 45mmCarbide End Mill,Dia 18.0mm,Cut L 45mm
  • Item # 16E761
  • Mfr. Model # AEMM-180-4X
  • Carbide End Mill, Type Finishing and Roughing, End Style Square, End Single, Length of Cut 45mm, Overall...More

Carb End Mill,3/4 In,3FL,CC,Uncoated
  • MICRO 100
  • Carb End Mill, 3/4 In, 3FL, CC, UncoatedCarb End Mill,3/4 In,3FL,CC,Uncoated
  • Item # 14T144
  • Mfr. Model # GEC-750-3-125
  • Carbide End Mill, C2 Micro Grain, Finishing and Roughing, Diameter 3/4 In, End Style Corner Radius, Single...More

Sp Flute Tap,Plug,M24x2.00mm,Bright
  • SANDVIK COROMANT
  • Sp Flute Tap, Plug, M24x2.00mm, BrightSp Flute Tap,Plug,M24x2.00mm,Bright
  • Item # 25H191
  • Mfr. Model # EP10M24X2.0
  • Spiral Flute Tap, Right Hand, Tap Style Plug, Size M24, Pitch 2.00mm, Material High Speed Steel-E-PM, Bright...More

Hex Rethreading Bolt Die,Steel,5/16,24
Hex Rethreading Bolt Die,Steel,3/8,24
End Mill,Roughing,Co,TiCN,7/8,5 FL,Sq
  • NIAGARA CUTTER
  • End Mill, Roughing, Co, TiCN, 7/8,5 FL, SqEnd Mill,Roughing,Co,TiCN,7/8,5 FL,Sq
  • Item # 2PWF2
  • Mfr. Model # 88407
  • End Mill, Roughing, Fine Pitch, General Purpose, Number of Flutes 5, Single End, Square End Style, Non-Center...More

Results per page: 16 | 32 | 48