Skip Content

Filter Results By

Applied Filters Clear All

Brand
  • View MoreView Less
Price
  • View MoreView Less
Shop By

Machining

126 Results Found that Include 151 Products

Results per page: 16 | 32 | 48
Hex Rethreading Bolt Die,Steel,9/16,12
Diamond Knife Sharpener,Table Top
Tool Sharpener,8 In
  • SCHEPPACH
  • Tool Sharpener, 8 InTool Sharpener,8 In
  • Item # 15D999
  • Mfr. Model # 15D999
  • Tool Sharpener, Wet Wheel, Motor HP 1/6, Single Phase, Voltage 120, H60 Hz, 2.0 Amps AC, 120 RPM, 220 Grit,...More

Integrated Die/Die Stock,#10-32
  • WESTWARD
  • Integrated Die/Die Stock, #10-32Integrated Die/Die Stock,#10-32
  • Item # 2PCN3
  • Mfr. Model # 2PCN3
  • Integrated Die/Die Stock, High Speed Steel, Right, Size #10, Pitch 32, NF, Outside Dia 1 3/8 In, Thickness...More

Arbor Spacer,5/8 ID,0.118-0.236 In T
  • DAYTON
  • Arbor Spacer, 5/8 ID, 0.118-0.236 In TArbor Spacer,5/8 ID,0.118-0.236 In T
  • Item # 1LNE6
  • Mfr. Model # 1LNE6
  • Arbor Spacer Kit, Stamped Steel, Full Hard Temper, Thickness 0.118 to 0.236 In, Thickness 3 to 6 mm,...More

Integrated Die/Die Stock,3mmx0.5mm
Bench Edge Finishing Machine,7 In
  • DAYTON
  • Bench Edge Finishing Machine, 7 InBench Edge Finishing Machine,7 In
  • Item # 2KVZ6
  • Mfr. Model # 2KVZ6
  • Bench Edge Finishing Machine, 3/4 HP, Voltage 110, 1 Phase, Wheel Dia. 7 In., Dust Collection No, 9 Amps,...More

Integrated Die/Die Stock,12mmx1.75mm
Integrated Die/Die Stock,3/8-16
  • WESTWARD
  • Integrated Die/Die Stock, 3/8-16Integrated Die/Die Stock,3/8-16
  • Item # 2PCL6
  • Mfr. Model # 2PCL6
  • Integrated Die/Die Stock, High Speed Steel, Right, Size 3/8 In, Pitch 16, NC, Outside Dia 1 3/8 In, Thickness...More

Integrated Die/Die Stock,10mmx1.50mm
End Mill,Roughing,Co,TiN,7/8,5 FL,Sq End
  • NIAGARA CUTTER
  • End Mill, Roughing, Co, TiN, 7/8,5 FL, Sq EndEnd Mill,Roughing,Co,TiN,7/8,5 FL,Sq End
  • Item # 2PUH5
  • Mfr. Model # 71286
  • End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 5, Single End, Square End Style,...More

Nozzle,Blaster,Pk 2
  • MAXUS
  • Nozzle, Blaster, Pk 2Nozzle,Blaster,Pk 2
  • Item # 6ZA48
  • Mfr. Model # MXS40008
  • Abrasive Blaster Nozzle, Ceramic, Size 9/64 In, 18.0 CFM Required @80 PSI, For Use With 6ZA44 Pressure Feed...More

End Mill,Roughing,Co,7/8,5 FL,SGL Sq End
  • NIAGARA CUTTER
  • End Mill, Roughing, Co, 7/8,5 FL, SGL Sq EndEnd Mill,Roughing,Co,7/8,5 FL,SGL Sq End
  • Item # 2PVN1
  • Mfr. Model # 44537
  • End Mill, Roughing, Fine Pitch, General Purpose, Number of Flutes 5, Single End, Square End Style, Non-Center...More

Mini Attachment w/CBN Wheel XT-3000
End Mill,Roughing,Co,TiCN,5/8,4 FL,Sq
  • NIAGARA CUTTER
  • End Mill, Roughing, Co, TiCN, 5/8,4 FL, SqEnd Mill,Roughing,Co,TiCN,5/8,4 FL,Sq
  • Item # 2PWC8
  • Mfr. Model # 79594
  • End Mill, Roughing, Fine Pitch, General Purpose, Number of Flutes 4, Single End, Square End Style, Non-Center...More

End Mill,Roughing,Co,1 3/4,6 FL,Sq End
  • NIAGARA CUTTER
  • End Mill, Roughing, Co, 1 3/4,6 FL, Sq EndEnd Mill,Roughing,Co,1 3/4,6 FL,Sq End
  • Item # 2PTX6
  • Mfr. Model # 71564
  • End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style,...More

End Mill,Carbide,EXO,0.4mm,2 FL,Sq End
  • OSG
  • End Mill, Carbide, EXO, 0.4mm, 2 FL, Sq EndEnd Mill,Carbide,EXO,0.4mm,2 FL,Sq End
  • Item # 2TWG4
  • Mfr. Model # 8519004
  • End Mill, Standard, High Performance, Number of Flutes 2, Single End, Square End Style, Center Cutting Type,...More

Drill Bit Case,Jobber,Holds A-Z
  • CHICAGO-LATROBE
  • Drill Bit Case, Jobber, Holds A-ZDrill Bit Case,Jobber,Holds A-Z
  • Item # 4EJ46
  • Mfr. Model # 57808
  • Drill Bit Case, Jobber Length, Holds Letters A to Z, Steel, Overall Case Width 4 9/64 In, Overall Case Depth...More

Mini Attachment w/Diamond Wheel XT-3000
End Mill,Carbide,EXO,1.5mm,2 FL,Sq End
  • OSG
  • End Mill, Carbide, EXO, 1.5mm, 2 FL, Sq EndEnd Mill,Carbide,EXO,1.5mm,2 FL,Sq End
  • Item # 2TWL3
  • Mfr. Model # 3021520
  • End Mill, Rib Processing, High Performance, Number of Flutes 2, Single End, Square End Style, Center Cutting...More

End Mill,Roughing,TiN,2 In,8 FL,Sq End
  • NIAGARA CUTTER
  • End Mill, Roughing, TiN, 2 In, 8 FL, Sq EndEnd Mill,Roughing,TiN,2 In,8 FL,Sq End
  • Item # 2PUU2
  • Mfr. Model # 71338
  • End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 8, Single End, Square End Style,...More

Nozzle,Blaster,Pk 2
  • MAXUS
  • Nozzle, Blaster, Pk 2Nozzle,Blaster,Pk 2
  • Item # 6ZA45
  • Mfr. Model # MXS40005
  • Abrasive Blaster Nozzle, Ceramic, Size 3/32 In, 9.0 CFM Required @80 PSI, For Use With 6ZA44 Pressure Feed...More

Rd Adjustable Die,HSS,10,32
  • WIDIA GTD
  • Rd Adjustable Die, HSS, 10,32Rd Adjustable Die,HSS,10,32
  • Item # 4AKP4
  • Mfr. Model # 23733
  • Round Adjustable Die, High Speed Steel, Size 10, Pitch 32, NF, Outside Dia 1 In, Thickness 3/8 In, For...More

Tool Makers Vise,3-1/8 D,3-1/8 in Open
  • WILTON
  • Tool Makers Vise, 3-1/8 D, 3-1/8 in OpenTool Makers Vise,3-1/8 D,3-1/8 in Open
  • Item # 24W053
  • Mfr. Model # TMV/2
  • Tool Makers Vise, Jaw Width 2 in., Max. Opening 3-1/8 in., Throat Depth 3-1/8 in., Overall Length 7-3/4 in.,...More

Screw Extractor,1/2-9/16 In
End Mill,Carbide,EXO,0.5mm,2 FL,Sq End
  • OSG
  • End Mill, Carbide, EXO, 0.5mm, 2 FL, Sq EndEnd Mill,Carbide,EXO,0.5mm,2 FL,Sq End
  • Item # 2TWG5
  • Mfr. Model # 8519005
  • End Mill, Standard, High Performance, Number of Flutes 2, Single End, Square End Style, Center Cutting Type,...More

Blade and Edge Sharpener Kit
Rd Adjustable Die,HSS,5/16,18
  • WIDIA GTD
  • Rd Adjustable Die, HSS, 5/16,18Rd Adjustable Die,HSS,5/16,18
  • Item # 4AKP7
  • Mfr. Model # 23746
  • Round Adjustable Die, High Speed Steel, Size 5/16, Pitch 18, NC, Outside Dia 1 In, Thickness 3/8 In, For...More

Hex Rethreading Bolt Die,Steel,M12,1.75
Carbide Turning Insert,CNMG 543-PR 4225
  • SANDVIK COROMANT
  • Carbide Turning Insert, CNMG 543-PR 42255/8" Inscribed Circle, CNMG, 80 Degrees Diamond, Carbide Turning Insert
  • Item # 4MDZ9
  • Mfr. Model # CNMG 543-PR 4225
  • Carbide Turning Insert, 0 Degrees , 80 Degrees Diamond, Style CNMG, Insert Size 543, Chip-Breaker PR, Grade...More

Results per page: 16 | 32 | 48