Skip Content

Filter Results By

Applied Filters Clear All

Brand
  • View MoreView Less
Price
  • View MoreView Less
Shop By
Ratings

Machining

337 Results Found that Include 404 Products 

Results per page: 16 | 32 | 48
Shop Press w/ Manual Pump,25 Ton
  • HEIN-WERNER
  • Shop Press w/ Manual Pump, 25 Ton
  • Item # 12G733
  • Mfr. Model # HW93300
  • Shop Press w/ Manual Pump, Frame Capacity (Tons) 25, Frame Type H Style, H2506 Cylinder, Cylinder Type Single...More

Tube Type Oil Skimmer
  • ABANAKI
  • Tube Type Oil Skimmer
  • Item # 6KYV8
  • Mfr. Model # SVIPER01
  • Oil Skimmer, 3/4'' Diameter Tube Connection, Up To 100 gph Oil Removal, RPM 57, Max. Temp. 160 F, Surface,...More

Lathe,12x36,2HP,1Phase
  • OPTIMUM
  • Lathe, 12x36,2HP, 1Phase
  • Item # 5RAK0
  • Mfr. Model # D320x920
  • Lathe, 2 Motor HP, 1 Phase, 115/230 Voltage, 60 Hz, Spindle Taper 3MT, Number of Spindle Speeds 18, Tailstock...More

H Frame Press Set
  • ENERPAC
  • H Frame Press Set
  • Item # 3KD80
  • Mfr. Model # IPA-2520
  • Heavy Duty Industrial Hydraulic H Frame Press Set, Frame Capacity (Tons) 25, Frame Type Heavy Duty Welded,...More

Geared Head Bench Lathe,W/Stand,1 Ph
  • JET
  • Geared Head Bench Lathe, W/Stand, 1 Ph
  • Item # 5CEZ5
  • Mfr. Model # GHB1340A w/CBS-1340A
  • Geared Head Bench Lathe, 2 Motor HP, 1 Phase, 230 Voltage, 60 Hz, Spindle Taper 5 MT (3MT), Number of Spindle...More

Shop Press,25 Tons,Air/Hydraulic
  • GRAY
  • Shop Press, 25 Tons, Air/Hydraulic
  • Item # 36G643
  • Mfr. Model # SP25 Air
  • Shop Press, Frame Capacity (Tons) 25, Frame Type H, Cylinder Stroke (In.) 6-1/4, Ram Travel (In.) 6-1/4, Pump...More

Geared Head Bench Lathe,W/Stand,3 HP
  • JET
  • Geared Head Bench Lathe, W/Stand, 3 HP
  • Item # 5CEZ6
  • Mfr. Model # GH-1340W-1
  • Geared Head Engine Lathe, 3 HP, 1 Phase, 230 Voltage, 60 Hz, Swing Over Bed 13 In., Distance Between Centers...More

Abrasive Blast Cabinet,60x48,Siphon-Feed
  • ECONOLINE
  • Abrasive Blast Cabinet, 60x48, Siphon-Feed
  • Item # 4NFU2
  • Mfr. Model # 101701G-A
  • Abrasive Blast Cabinet, Siphon-Feed, Nominal Size (In.) 60 x 48, Work Area Height (In.) 40, Work Area Width...More

Downdraft Table,33 x 60 In,1 HP,460V
  • DYNABRADE
  • Downdraft Table, 33 x 60 In, 1 HP, 460V
  • Item # 45J417
  • Mfr. Model # 63209
  • Downdraft Table, Table Size 33 In. x 60 In., Voltage 460, Amps AC 2.0A/hr., Phase 3, Hz 60, Vacuum Suction...More

Downdraft Table,36 x 72 In,1 HP, 115V
  • DYNABRADE
  • Downdraft Table, 36 x 72 In, 1 HP, 115V
  • Item # 45J423
  • Mfr. Model # 64700
  • Downdraft Table, Table Size 36 In. x 72 In., Voltage 115, Amps AC 13.0A/hr., Phase 1, Hz 60, Vacuum Suction...More

Engine Lathe w/DRO,16x60,6HP,3Phase
  • OPTIMUM
  • Engine Lathe w/DRO, 16x60,6HP, 3Phase
  • Item # 5RAK4
  • Mfr. Model # D420x1500
  • Engine Lathe with DRO, 6 Motor HP, 3 Phase, 230 Voltage, 60 Hz, Spindle Taper 6MT, Number of Spindle Speeds...More

Geared Head Lathe,3HP,3P,40 Center In
  • JET
  • Geared Head Lathe, 3HP, 3P, 40 Center In
  • Item # 42W789
  • Mfr. Model # GH-1440W-3
  • Geared Head Lathe, 3 Motor HP, 3 Phase, 230/460 VoltageSpindle Taper MT-5, Number of Spindle Speeds 12,...More

Engine Lathe w/DRO,14x40,2HP,3Phase
  • OPTIMUM
  • Engine Lathe w/DRO, 14x40,2HP, 3Phase
  • Item # 5RAK3
  • Mfr. Model # D360x1000
  • Engine Lathe with DRO, 2 Motor HP, 3 Phase, 230 Voltage, 60 Hz, Spindle Taper 5MT, Number of Spindle Speeds...More

Lathe W/DRO,13x40,2HP,1Phase
  • OPTIMUM
  • Lathe W/DRO, 13x40,2HP, 1Phase
  • Item # 5RAK1
  • Mfr. Model # D330x1000
  • Lathe With DRO, 2 Motor HP, 1 Phase, 115/230 Voltage, 60 Hz, Spindle Taper 5MT, 70-2000 Spindle Speeds 8,...More

Drill Sharpener w/Auto Sharpener XT-3000
  • DAREX
  • Drill Sharpener w/Auto Sharpener XT-3000
  • Item # 6MVK0
  • Mfr. Model # LEX900A
  • Drill Sharpener, Drill Dia./Capacity .8125, Max. RPM 3450, Voltage 115, 10 Amps, 1/4 HP, Features Angles...More

Counterbore Head,Right,7.283 in. dia.
  • SANDVIK COROMANT
  • Counterbore Head, Right, 7.283 in. dia.
  • Item # 19ZD86
  • Mfr. Model # 818.20-1D185.00S24B
  • Counterbore Head, CoroDrill 818, Diameter 7.283 In., Ratio 150 x Dc, Number of Inserts Required 1, Inscribed...More

Adaptor,Duobore,C6-391.69A-7-063 360
Adaptor,CoroBore XL,C8-R825XLS17-FL340
  • SANDVIK COROMANT
  • Adaptor, CoroBore XL, C8-R825XLS17-FL340
  • Item # 29VY49
  • Mfr. Model # C8-R825XLS17-FL340
  • Assembly, CoroBore XL, 820-460CN19, Diameter 1.575 In., 4.685 In. Cutting Length, 2 Number of Inserts...More

Counterbore Head,Right,8.750 in. dia.
  • SANDVIK COROMANT
  • Counterbore Head, Right, 8.750 in. dia.
  • Item # 19ZD96
  • Mfr. Model # A818.20-1D08.750S27B
  • Counterbore Head, CoroDrill 818, Diameter 8.750 In., Ratio 150 x Dc, Number of Inserts Required 1, Inscribed...More

Counterbore Head,Right,6.299 in. dia.
  • SANDVIK COROMANT
  • Counterbore Head, Right, 6.299 in. dia.
  • Item # 19ZD85
  • Mfr. Model # 818.20-1D160.00S22B
  • Counterbore Head, CoroDrill 818, Diameter 6.299 In., Ratio 150 x Dc, Number of Inserts Required 1, Inscribed...More

Adaptor,CoroBore XL,C8-R825XLS17-FK340
  • SANDVIK COROMANT
  • Adaptor, CoroBore XL, C8-R825XLS17-FK340
  • Item # 29VY48
  • Mfr. Model # C8-R825XLS17-FK340
  • Assembly, CoroBore XL, 826-780TC11, Diameter 1.575 In., 7.795 In. Cutting Length, 1 Number of Inserts...More

Counterbore Head,Right,7.750 in. dia.
  • SANDVIK COROMANT
  • Counterbore Head, Right, 7.750 in. dia.
  • Item # 19ZD95
  • Mfr. Model # A818.20-1D07.750S25B
  • Counterbore Head, CoroDrill 818, Diameter 7.750 In., Ratio 150 x Dc, Number of Inserts Required 1, Inscribed...More

Adjustable Drill Head,Right,6.500 in.dia
  • SANDVIK COROMANT
  • Adjustable Drill Head, Right, 6.500 in.dia
  • Item # 19ZE23
  • Mfr. Model # A801.20-24D6500
  • Adjustable Drill Head, CoroDrill 801, Diameter 6.500 In., Ratio 150 x Dc, Number of Inserts Required 1,...More

Counterbore Head,Right,5.314 in. dia.
  • SANDVIK COROMANT
  • Counterbore Head, Right, 5.314 in. dia.
  • Item # 19ZD84
  • Mfr. Model # 818.20-1D135.00S20B
  • Counterbore Head, CoroDrill 818, Diameter 5.314 In., Ratio 150 x Dc, Number of Inserts Required 1, Inscribed...More

Adaptor,CoroBore XL,C8-R825XLS17-FJ340
  • SANDVIK COROMANT
  • Adaptor, CoroBore XL, C8-R825XLS17-FJ340
  • Item # 29VY47
  • Mfr. Model # C8-R825XLS17-FJ340
  • Assembly, CoroBore XL, 826-540TC11, Diameter 1.575 In., 4.882 In. Cutting Length, 1 Number of Inserts...More

Counterbore Head,Right,6.750 in. dia.
  • SANDVIK COROMANT
  • Counterbore Head, Right, 6.750 in. dia.
  • Item # 19ZD94
  • Mfr. Model # A818.20-1D06.750S23B
  • Counterbore Head, CoroDrill 818, Diameter 6.750 In., Ratio 150 x Dc, Number of Inserts Required 1, Inscribed...More

Results per page: 16 | 32 | 48