Skip Content

Filter Results By

Applied Filters Clear All

Brand
  • View MoreView Less
Price
  • View MoreView Less
Shop By
  • View MoreView Less
Ratings

Machining

3,552 Results Found that Include 3,743 Products

Results per page: 16 | 32 | 48
Machinist Mixer,3 GPM
  • ZEBRA SKIMMERS CORP.
  • Machinist Mixer, 3 GPMMachinist Mixer,3 GPM
  • Item # 34WP34
  • Mfr. Model # MIX0327
  • Machinist Mixer, Flow Rate (GPM) 3, Drum Mounting, Dilution Range 0 Percent to 7 Percent, Mixing of...More

Carbide Bur Sets,1/2,8 Pcs
  • WIDIA METAL REMOVAL
  • Carbide Bur Sets, 1/2,8 PcsCarbide Bur Sets,1/2,8 Pcs
  • Item # 2RPW1
  • Mfr. Model # M40594
  • Carbide Bur Sets, Double Cut, Shank Size (In.) 1/4, Max. RPM 50,000, Angle 14 and 28 Degree, Number of Pieces...More

Tap and Die Set,114 pc,Carbon Steel
Tap and Die Set,76 pc,High Carbon Steel
  • IRWIN HANSON
  • Tap and Die Set, 76 pc, High Carbon SteelTap and Die Set, Fractional & Metric, High Carbon Steel
  • Item # 2ETL4
  • Mfr. Model # 26376
  • Tap and Die Set, SAE and Metric, High Carbon Steel, Plain, Number of Pieces 76, Cutting Sizes 34, Die Type...More

Round Mesh Bskt w/Hndls,inLxinWx10inH
Bench Grinder,10 In,1 HP,115 V,10 A
  • DAYTON
  • Bench Grinder, 10 In, 1 HP, 115 V, 10 ABench Grinder
  • Item # 2LKT2
  • Mfr. Model # 2LKT2
  • Bench Grinder, 1 HP, Voltage 115/230, 1 Phase, Wheel Dia. 10 In., Dust Collection Yes, 10/5 Amps, 1725 No...More

Vise,Quick Release
  • DAYTON
  • Vise, Quick ReleaseQuick-Release Vise
  • Item # 4YG29
  • Mfr. Model # 4YG29
  • Quick-Release Vise, Fixed Base, Jaw Plate Parallel to 0.001 In. with Recessed Steps for Accurate Positioning...More

Carbide Bur Set,Dbl Cut,1/4 In,16 Pcs
  • WESTWARD
  • Carbide Bur Set, Dbl Cut, 1/4 In, 16 PcsCarbide Bur Set,Dbl Cut,1/4 In,16 Pcs
  • Item # 2LYT1
  • Mfr. Model # 2LYT1
  • Carbide Bur Set, Double Cut, Shank Size 1/4 In, Max RPM 35,000, Number of Pieces 16, Tool Material Carbide...More

Slotted Shim Asst,SS,2 x 2 In,260 PC
  • GRAINGER APPROVED
  • Slotted Shim Asst, SS, 2 x 2 In, 260 PCSlotted Shim Asst,SS,2 x 2 In,260 PC
  • Item # 36D703
  • Mfr. Model # 36D703
  • Slotted Shim Kit, With Tab, 302/304 Stainless Steel, Size A-2 In.x2 In., Temper Full Hard for 302 SS and...More

Dust Collector,115 V
Silver/Deming Set,8 PC,HSS,118 Deg
  • CHICAGO-LATROBE
  • Silver/Deming Set, 8 PC, HSS, 118 DegSilver/Deming Set,8 PC,HSS,118 Deg
  • Item # 1V691
  • Mfr. Model # 69857
  • Item Reduced Shank Drill Bit Set, Dimension Type Fractional Inch, Drill Diameter 9/16 In. to 1 In. By 16ths,...More

Keyway Broach Set,#C-1
  • HASSAY SAVAGE CO.
  • Keyway Broach Set, #C-1Keyway Broach Set,#C-1
  • Item # 1KEG8
  • Mfr. Model # 15318
  • Keyway Broach Set, Set Type #C-1, Broach Style II, III, Number Of Keyway Combinations 18, Keyway Sizes 1/8...More

Pressure Blaster,100lb.
  • ALLSOURCE
  • Pressure Blaster, 100lb.Pressure Blaster,100lb.
  • Item # 15E745
  • Mfr. Model # 41600
  • Portable Pressure Blaster, Deadman, Hopper Capacity (Lb.) 100, Tank Dimension (In.) 12 x 27, Steel, Air...More

ChillyBits(tm),Air Colder Than 32 F
  • ABANAKI
  • ChillyBits(tm), Air Colder Than 32 FChillyBits(tm),Air Colder Than 32 F
  • Item # 1MEB7
  • Mfr. Model # CB1
  • ChillyBits(TM), For Use With Drill Presses, Lathes And Other Machining and Drilling Units That Might Require...More

Extractor/Drill Set,HSS,Cobalt,48 Pcs
  • IRWIN HANSON
  • Extractor/Drill Set, HSS, Cobalt, 48 PcsExtractor/Drill Set,HSS,Cobalt,48 Pcs
  • Item # 2ETL8
  • Mfr. Model # 3101010
  • Extractor/Drill Set, Spiral Flute/Multi Spline, Number of Pieces 48, For Removing Stud, Bolt, Screw and Nuts...More

Punch/Die Set
  • PRECISION BRAND
  • Punch/Die SetPunch/Die Set
  • Item # 3L761
  • Mfr. Model # 40110
  • Punch/Die Set, Punches 1/8 to 3/4 Inch Holes, Cuts Up to 0.025 or 0.010 Inch Depending on Material, Self...More

Coolant Pump/Tank,5 G
  • LITTLE GIANT
  • Coolant Pump/Tank, 5 GCoolant Pump/Tank,5 G
  • Item # 7P081
  • Mfr. Model # 7P081
  • Machine Coolant Pump/Tank, Tank Capacity 5 Gallons, Water Flow @ 1 Foot of Head 8.3 GPM, 100 SSU Cutting Oil...More

Tap and Die Set,53 pc,Raw Steel
  • IRWIN HANSON
  • Tap and Die Set, 53 pc, Raw SteelTap and Hex Die Set, Metric, Raw Steel
  • Item # 9K175
  • Mfr. Model # 26394
  • Tap and Die Set, Metric, Raw Steel, Number of Pieces 53, Cutting Sizes 23, Die Type 1 In. Hex, Sizes Included...More

Self Alignment Tap & Die Set,75pc,Carbon
  • IRWIN HANSON
  • Self Alignment Tap & Die Set, 75pc, CarbonSelf Alignment Tap & Die Set, SAE & Metric, Carbon
  • Item # 40L826
  • Mfr. Model # 1841350
  • Tap and Die Set, SAE and Metric, Right Hand, Carbon, Mill, Number of Pieces 75, Cutting Sizes 3-12mm, #4-12,...More

Hydraulic Press,10 t,Manual Pump, 36 In
  • DAKE CORPORATION
  • Hydraulic Press, 10 t, Manual Pump, 36 InSingle Acting, Fixed Cylinder, H-Frame Hydraulic Press
  • Item # 40F053
  • Mfr. Model # 972200
  • Hydraulic Press, Frame Capacity 10 t, Frame Type H Frame, Fixed Cylinder, Cylinder Type Single Action,...More

Aircraft Drill Set,29 PC,Co,135 Deg
  • CLEVELAND
  • Aircraft Drill Set, 29 PC, Co, 135 DegAircraft Drill Set,29 PC,Co,135 Deg
  • Item # 2VTX8
  • Mfr. Model # C14499
  • Aircraft Mechanics Drill Set, Cutting Direction Right Hand, Material Cobalt Steel, Dimension Type Fractional...More

Hex Rethreading Die Set, Std 16 Pc
  • WESTWARD
  • Hex Rethreading Die Set, Std 16 PcHex Rethreading Die Set, Std 16 Pc
  • Item # 10M990
  • Mfr. Model # 10M990
  • Hex Rethreading Die Set, Series 377, Number of Pieces 16, Material Carbon Steel, Sizes Included NC: 1/4-20,...More

Keyway Broach,Hex,W 9/16 ,Cut L 1-1/2
Keyway Broach,Hex,W 15/32 ,Cut L 1-3/8
Steel Floor Stand For Dayton Mill/Drills
Slotted Shim Asst,SS,4 x 4 In,80 PC
  • GRAINGER APPROVED
  • Slotted Shim Asst, SS, 4 x 4 In, 80 PCSlotted Shim Asst,SS,4 x 4 In,80 PC
  • Item # 36D715
  • Mfr. Model # 36D715
  • Slotted Shim Kit, With Tab, 302/304 Stainless Steel, Size C-4 In.x4 In., Temper Full Hard for 302 SS and...More

Vise,Angle
  • DAYTON
  • Vise, AngleAngle Vise
  • Item # 4TK08
  • Mfr. Model # 4TK08
  • Angle Vise, Angle Base, Jaw Deflection 0.004 In. @ 4000 lbs, Jaw Plate Square to 0.002 In., Bed/Base Parallel...More

Results per page: 16 | 32 | 48