Skip Content

Filter Results By

Applied Filters Clear All

Brand
Price
Shop By
Ratings

Machining

4,135 Results Found that Include 4,987 Products

Product availability based on selecting either shipping or pick up and a location. Dismiss
Results per page: 16 | 32 | 48
Stainless SteelDigital Caliper 0.0005/0.01mm" Resolution
  • WESTWARD
  • Stainless SteelDigital Caliper 0.0005/0.01mm" ResolutionDigital Calipers
  • Item # 1AAU4
  • Mfr. Model # 1AAU4
  • Digital Caliper, Material Stainless Steel, Resolution 0.0005/0.01mm In., Range 0 to 6 In./0 to 150mm, Jaw...More

Carbide End Mill,3in,GMHX12C4
  • GORILLA MILL
  • Carbide End Mill, 3in, GMHX12C4Carbide End Mill,3in,GMHX12C4
  • Item # 36PR13
  • Mfr. Model # GMHX12C4
  • Carbide End Mill, Grade C2 Micro Grain, List Number GMHX12C4, General Purpose, End Style 45 Degrees...More

Routing End Mill,Spiral O,1/4,7/8,2 1/2
  • ONSRUD
  • Routing End Mill, Spiral O, 1/4,7/8,2 1/2Routing End Mill,Spiral O,1/4,7/8,2 1/2
  • Item # 4KPG7
  • Mfr. Model # 65-025
  • Routing End Mill, Upcut Spiral O-Flute, High Performance, Number of Flutes 1, Single End, Plunge Point End...More

Feeler Gauge,0.0010x12 L,PK12
  • GRAINGER APPROVED
  • Feeler Gauge, 0.0010x12 L, PK12Feeler Gauge,0.0010x12 L,PK12
  • Item # 5XB92
  • Mfr. Model # 19120
  • Feeler Gauge, High Carbon Steel, Thickness 0.001 In, Thickness 0.025 mm, Thickness Tolerance +/-0.00012 In,...More

Depth Gage,Digital,6 In/150mm
  • WESTWARD
  • Depth Gage, Digital, 6 In/150mmDepth Gage,Digital,6 In/150mm
  • Item # 2YNK3
  • Mfr. Model # 2YNK3
  • Depth Gage, SPC Output No, Base Style Full, Range 0 to 6 In./0 to 150mm, Resolution 0.0005 In./0.01mm, Base...More

End Mill,Roughing,Co,3/8,4 FL,SGL Sq End
  • OSG
  • End Mill, Roughing, Co, 3/8,4 FL, SGL Sq EndEnd Mill,Roughing,Co,3/8,4 FL,SGL Sq End
  • Item # 2PMY4
  • Mfr. Model # 4709700
  • End Mill, Roughing/Finishing, General Purpose, Number of Flutes 4, Single End, Square End Style, Center...More

Tap Extension,Size 5/16,5 In OAL
  • WHITNEY TOOL
  • Tap Extension, Size 5/16,5 In OALTap Extension,Size 5/16,5 In OAL
  • Item # 4AMZ2
  • Mfr. Model # 96094
  • Tap Extension, Tool Steel, Tap Size 5/16, Body Dia 1/2 In, Square Drive Size 0.238 In, Overall Length 5 In,...More

Bench Grinder,6 In,3450 RPM,1/3 HP
  • WESTWARD
  • Bench Grinder, 6 In, 3450 RPM, 1/3 HPBench Grinder
  • Item # 1KEL8
  • Mfr. Model # 1KEL8
  • Bench Grinder, 1/3 HP, Voltage 120, 1 Phase, Wheel Dia. 6 In., Dust Collection No, 2.1 Amps, 3450 No Load...More

Screw Extractor Drill Bit Set,LH,4 Pc
Drill/Extractor Set,4 PC,#5-1/4 In Cap
  • ALDEN
  • Drill/Extractor Set, 4 PC, #5-1/4 In CapDouble-Ended Bits Drill/Extractor Set
  • Item # 4DZL2
  • Mfr. Model # 4507P
  • Drill/Extractor Set, Double-Ended Bits, Number of Pieces 4, For Removing Studs, Bolts, Screws Bolts #5 and #6...More

Coolant,1 gal,Bottle
  • TRICO
  • Coolant, 1 gal, BottleSynthetic Coolant
  • Item # 5JG75
  • Mfr. Model # 30656
  • Coolants, Synthetic Coolant, Water Soluble, Chlorine-Free, Phenol, Nitrite, 1 gal., Bottle, Yellow, Green,...More

Carbide Bur Set,Single Cut,1/8 In,12 Pcs
Hose Extension Kit
Skimmer Tube,18 In,For 1MEC1 Oil Skimmer
HSS End Mill,1 In D,1 1/2 In Cut L
  • CLEVELAND
  • HSS End Mill, 1 In D, 1 1/2 In Cut LHSS End Mill,1 In D,1 1/2 In Cut L
  • Item # 31C478
  • Mfr. Model # C41641
  • High Speed Steel End Mill, Square End, List Number HG2, Number of Flutes 2, End Center, End Style Single End,...More

Carbide End Mill,1/8 in. dia.,3/8 in Cut
  • OSG
  • Carbide End Mill, 1/8 in. dia., 3/8 in CutCarbide End Mill,1/8 in. dia.,3/8 in Cut
  • Item # 35CZ37
  • Mfr. Model # 442BN
  • Carbide End Mill, Grade General Purpose, List Number 442BN, Double End End Mill Style, Dimension Type...More

Construction Reamer,3/4 In.,7 In. L
  • GRAINGER APPROVED
  • Construction Reamer, 3/4 In., 7 In. LConstruction Reamer,3/4 In.,7 In. L
  • Item # 13H842
  • Mfr. Model # 13H842
  • Construction Reamer, Flute Type Spiral, Spiral Direction Left Hand, Cutting Direction Right Hand, High Speed...More

T Handle Tap Wrench,Ratchet,7/32-1/2 In
T Handle Tap Wrench,Fixed,1/4 to 1/2 In
Vise,Drillpress
  • DAYTON
  • Vise, DrillpressVise,Drillpress
  • Item # 3W761
  • Mfr. Model # 3W761
  • Drill Press 4 Inch Vise, Jaw Opening 4 Inches, Jaw Width 4 Inches, Throat Depth 1 1/2 Inches, Can Be Turned...More

Tap and Reamer Aligner/Holder,0 - 1/2 In
Inside Firm Joint Caliper,Range 12 In.
Outside Firm Joint Caliper,Range 12 In.
Tap Index,Jobber Length,Steel
  • HUOT
  • Tap Index, Jobber Length, SteelTap Index,Jobber Length,Steel
  • Item # 18EC40
  • Mfr. Model # 12700
  • Tap Index, Jobber Length, Holds National Coarse, Fine Taps, Drills, Steel, Overall Case Width (In.) 4-1/2,...More

Tap Wrench,Ratcheting,Rev,12 to 1/2 In
  • GENERAL
  • Tap Wrench, Ratcheting, Rev, 12 to 1/2 InTap Wrench,Ratcheting,Rev,12 to 1/2 In
  • Item # 6TFF3
  • Mfr. Model # 162R
  • T Handle Tap Wrench, Ratcheting, Reversible, Fractional Tap Capacity (In.) 1/2, Machine Screw Tap Capacity 12...More

Drill Point Gage,59 Degree,32nds Grad
Taper Shank Drill,3/4,#2MT,Blk Oxide
  • CHICAGO-LATROBE
  • Taper Shank Drill, 3/4, #2MT, Blk OxideTaper Shank Drill,3/4,#2MT,Blk Oxide
  • Item # 1N807
  • Mfr. Model # 53148
  • Taper Shank Drill, Standard, General Purpose Grade, High Speed Steel, Black Oxide Finish, Conventional Point,...More

Vernier Caliper,6 In,SS,0.001 Grad
  • GENERAL
  • Vernier Caliper, 6 In, SS, 0.001 GradVernier Calipers
  • Item # 3YWH5
  • Mfr. Model # MG6001DC
  • Vernier Caliper, Range 0 to 6 In, Graduations 0.001 In, Graduations 0.02 mm, Jaw Depth 1.5 In, Measures...More

Results per page: 16 | 32 | 48
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More