Skip Content

Filter Results By

Applied Filters Clear All

Machining Supplies

65 Results Found that Include 66 Products

Product availability based on selecting either shipping or pick up and a location. Dismiss
Results per page: 16 | 32 | 48
Extractor,Screw,#8
  • CHICAGO-LATROBE
  • Extractor, Screw, #8Extractor,Screw,#8
  • Item # 1U230
  • Mfr. Model # 65021
  • Screw Extractor, Size #8, Drill Size 13/16 Inch, Large End Diameter 1 1/32 Inches, Small End Diameter 3/4...More

ShimStck,Sheet,HighBlue Stl,0.0250In,PK2
Shim,Roll,302,Full Hard,6x100 Inx0.025mm
  • MAUDLIN PRODUCTS
  • Shim, Roll, 302, Full Hard, 6x100 Inx0.025mmShim,Roll,302,Full Hard,6x100 Inx0.025mm
  • Item # 2NZZ6
  • Mfr. Model # 001-6-100
  • Shim Stock, Roll, 302 Stainless Steel, Temper Full Hard, Thickness 0.001 In., Thickness 0.025 mm, Thickness...More

Shim,Round,Min ID 0.313 In,PK25
  • ACCURATE MFD PRODUCTS
  • Shim, Round, Min ID 0.313 In, PK25Shim,Round,Min ID 0.313 In,PK25
  • Item # 2JHC9
  • Mfr. Model # 2JHC9
  • Shim, Round, 18-8 Stainless Steel, Thickness 0.005 In., Thickness Tolerance +/-0.0005 In, Outside Dia....More

Slotted Shim,Tab,AA,0.0300 In,PK20
  • PRECISION BRAND
  • Slotted Shim, Tab, AA, 0.0300 In, PK20Slotted Shim,Tab,AA,0.0300 In,PK20
  • Item # 5GE13
  • Mfr. Model # 42113
  • Slotted Shim, With Tab, PVC, Size AA, Thickness 0.030 In, Thickness 0.762mm, Thickness Tolerance +/-0.0015...More

Slotted Shim,2x2 Inx0.015In,PK20
  • GRAINGER APPROVED
  • Slotted Shim, 2x2 Inx0.015In, PK20Slotted Shim,2x2 Inx0.015In,PK20
  • Item # 36D724
  • Mfr. Model # 36D724
  • Slotted Shim Pack, With Tab, 302/304 Stainless Steel, Size A-2 In.x2 In., Temper Full Hard, Thickness (In.)...More

Slotted Shim,2x2 Inx0.010In,PK20
  • GRAINGER APPROVED
  • Slotted Shim, 2x2 Inx0.010In, PK20Slotted Shim,2x2 Inx0.010In,PK20
  • Item # 36D723
  • Mfr. Model # 36D723
  • Slotted Shim Pack, With Tab, 302/304 Stainless Steel, Size A-2 In.x2 In., Temper Full Hard, Thickness (In.)...More

Screw Extractor,#7
  • WESTWARD
  • Screw Extractor, #7Screw Extractor,#7
  • Item # 2RUR1
  • Mfr. Model # 2RUR1
  • Screw Extractor, Spiral Flute, For Removing Studs, Bolts, Screws 1-1/8 to 1-1/2, Size #7, Drive Size (In.)...More

Slotted Shim,2x2 Inx0.005In,PK20
  • GRAINGER APPROVED
  • Slotted Shim, 2x2 Inx0.005In, PK20Slotted Shim,2x2 Inx0.005In,PK20
  • Item # 36D722
  • Mfr. Model # 36D722
  • Slotted Shim Pack, With Tab, 302/304 Stainless Steel, Size A-2 In.x2 In., Temper Full Hard, Thickness (In.)...More

Shim Stock,Roll,Brass,0.0150 In,6 In
Slotted Shim,A-2x2 Inx0.005In,Pk20
  • MAUDLIN PRODUCTS
  • Slotted Shim, A-2x2 Inx0.005In, Pk20Slotted Shim,A-2x2 Inx0.005In,Pk20
  • Item # 2NZK4
  • Mfr. Model # MSA005-20
  • Slotted Shim, With Tab, 300 Series Stainless Steel, Size A, Temper Full Hard, Thickness 0.005 In., Thickness...More

Slotted Shim,A-2x2 Inx0.010In,Pk20
  • MAUDLIN PRODUCTS
  • Slotted Shim, A-2x2 Inx0.010In, Pk20Slotted Shim,A-2x2 Inx0.010In,Pk20
  • Item # 2NZK5
  • Mfr. Model # MSA010-20
  • Slotted Shim, With Tab, 300 Series Stainless Steel, Size A, Temper Full Hard, Thickness 0.010 In., Thickness...More

Shim Stock,Roll,Cold 302 SS,0.0100 In
  • GRAINGER APPROVED
  • Shim Stock, Roll, Cold 302 SS, 0.0100 InShim Stock,Roll,Cold 302 SS,0.0100 In
  • Item # 5FA45
  • Mfr. Model # 22330
  • Shim Stock, Roll, Cold Rolled Type 302 SS, Full Hard Temper, Thickness 0.010 In, Thickness 0.254 mm,...More

Shim Stock,Roll,Cold 302 SS,0.0150 In
  • GRAINGER APPROVED
  • Shim Stock, Roll, Cold 302 SS, 0.0150 InShim Stock,Roll,Cold 302 SS,0.0150 In
  • Item # 5FA47
  • Mfr. Model # 22375
  • Shim Stock, Roll, Cold Rolled Type 302 SS, Full Hard Temper, Thickness 0.015 In, Thickness 0.381 mm,...More

Shim Stock,Roll,Cold 302 SS,150mm
  • GRAINGER APPROVED
  • Shim Stock, Roll, Cold 302 SS, 150mmShim Stock,Roll,Cold 302 SS,150mm
  • Item # 5FA65
  • Mfr. Model # 22980
  • Shim Stock, Roll, Cold Rolled Type 302 SS, Full Hard Temper, Thickness 0.800 mm, Thickness Tolerance...More

Shim,Round,Min ID 0.313 In,PK25
  • ACCURATE MFD PRODUCTS
  • Shim, Round, Min ID 0.313 In, PK25Shim,Round,Min ID 0.313 In,PK25
  • Item # 2JHD6
  • Mfr. Model # 2JHD6
  • Shim, Round, 18-8 Stainless Steel, Thickness 0.016 In., Thickness Tolerance +/-0.001 In, Outside Dia....More

Drill Bit Case,Taper Length,Steel
  • HUOT
  • Drill Bit Case, Taper Length, SteelDrill Bit Case,Taper Length,Steel
  • Item # 18DU62
  • Mfr. Model # 11600
  • Drill Bit Case, Taper Length, Holds 1/16 In. to 1/2 In. by 64ths, Steel, Overall Case Width (In.) 4, Overall...More

Shim,Roll,316,Annealed,6 x50 In x0.254mm
  • MAUDLIN PRODUCTS
  • Shim, Roll, 316, Annealed, 6 x50 In x0.254mmShim,Roll,316,Annealed,6 x50 In x0.254mm
  • Item # 2NZX2
  • Mfr. Model # 316-010-6-50
  • Shim Stock, Roll, 316 Stainless Steel, Temper Annealed, Thickness 0.010 In., Thickness 0.254 mm, Thickness...More

Shim,Roll,316,Annealed,6x100 In x0.127mm
  • MAUDLIN PRODUCTS
  • Shim, Roll, 316, Annealed, 6x100 In x0.127mmShim,Roll,316,Annealed,6x100 In x0.127mm
  • Item # 2NZY9
  • Mfr. Model # 316-005-6-100
  • Shim Stock, Roll, 316 Stainless Steel, Temper Annealed, Thickness 0.005 In., Thickness 0.127 mm, Thickness...More

Drill/Extractor Tool,1/2 In Size/Cap
  • ALDEN
  • Drill/Extractor Tool, 1/2 In Size/CapDrill/Extractor Tool,1/2 In Size/Cap
  • Item # 4DZK7
  • Mfr. Model # 5007P
  • Drill/Extractor Tool, Power Extractor Bit, For Removing Stud, Bolt, Screw and Nuts 1/2 In, 12mm, Size 1/2 In,...More

ShimStock,Sheet,Brass,0.0200 In,6 In,PK2
  • PRECISION BRAND
  • ShimStock, Sheet, Brass, 0.0200 In, 6 In, PK2ShimStock,Sheet,Brass,0.0200 In,6 In,PK2
  • Item # 5EY80
  • Mfr. Model # 17490
  • Shim Stock, Sheet, Brass, Half Hard Temper, Thickness 0.020 In, Thickness 0.508 mm, Thickness Tolerance...More

Shim,Roll,316,Annealed,12x50 In x0.127mm
  • MAUDLIN PRODUCTS
  • Shim, Roll, 316, Annealed, 12x50 In x0.127mmShim,Roll,316,Annealed,12x50 In x0.127mm
  • Item # 2NZX9
  • Mfr. Model # 316-005-12-50
  • Shim Stock, Roll, 316 Stainless Steel, Temper Annealed, Thickness 0.005 In., Thickness 0.127 mm, Thickness...More

Shim,Roll,302,Full Hard,6x100 Inx0.051mm
  • MAUDLIN PRODUCTS
  • Shim, Roll, 302, Full Hard, 6x100 Inx0.051mmShim,Roll,302,Full Hard,6x100 Inx0.051mm
  • Item # 2NZZ7
  • Mfr. Model # 002-6-100
  • Shim Stock, Roll, 302 Stainless Steel, Temper Full Hard, Thickness 0.002 In., Thickness 0.051 mm, Thickness...More

Shim,Round,Min ID 0.500 In,PK25
  • ACCURATE MFD PRODUCTS
  • Shim, Round, Min ID 0.500 In, PK25Shim,Round,Min ID 0.500 In,PK25
  • Item # 2JHF4
  • Mfr. Model # 2JHF4
  • Shim, Round, 18-8 Stainless Steel, Thickness 0.005 In., Thickness Tolerance +/-0.0005 In, Outside Dia....More

ShimStck,Sheet,ColdLowStl,0.0200In,PK10
  • PRECISION BRAND
  • ShimStck, Sheet, ColdLowStl, 0.0200In, PK10ShimStck,Sheet,ColdLowStl,0.0200In,PK10
  • Item # 5EY50
  • Mfr. Model # 16900
  • Shim Stock, Sheet, Cold Rolled Low Carbon Steel, Full Hard Temper, Thickness 0.020 In, Thickness 0.508 mm,...More

ShimStck,Sheet,ColdLowStl,0.0010 In,PK10
  • PRECISION BRAND
  • ShimStck, Sheet, ColdLowStl, 0.0010 In, PK10ShimStck,Sheet,ColdLowStl,0.0010 In,PK10
  • Item # 5EY32
  • Mfr. Model # 16810
  • Shim Stock, Sheet, Cold Rolled Low Carbon Steel, Full Hard Temper, Thickness 0.001 In, Thickness 0.025 mm,...More

Air Inlet Swivel
Shoe 3/4 Inch For Pipe Bender 1Vw36
Shim Stock,Roll,Cold Low Stl,0.0180 In
  • GRAINGER APPROVED
  • Shim Stock, Roll, Cold Low Stl, 0.0180 InShim Stock,Roll,Cold Low Stl,0.0180 In
  • Item # 5EU93
  • Mfr. Model # 16570
  • Shim Stock, Roll, Cold Rolled Low Carbon Steel, Full Hard Temper, Thickness 0.018 In, Thickness 0.457 mm,...More

Shim,Round,Min ID 0.500 In,PK25
  • ACCURATE MFD PRODUCTS
  • Shim, Round, Min ID 0.500 In, PK25Shim,Round,Min ID 0.500 In,PK25
  • Item # 2JHF5
  • Mfr. Model # 2JHF5
  • Shim, Round, 18-8 Stainless Steel, Thickness 0.006 In., Thickness Tolerance +/-0.0005 In, Outside Dia....More

Shim Stock,Roll,Cold 302 SS,0.0120 In
  • GRAINGER APPROVED
  • Shim Stock, Roll, Cold 302 SS, 0.0120 InShim Stock,Roll,Cold 302 SS,0.0120 In
  • Item # 5FA46
  • Mfr. Model # 22350
  • Shim Stock, Roll, Cold Rolled Type 302 SS, Full Hard Temper, Thickness 0.012 In, Thickness 0.305 mm,...More

Results per page: 16 | 32 | 48
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More