Skip Content

Filter Results By

Applied Filters Clear All

Machine Tool Accessories

215 Results Found that Include 236 Products

Product availability based on selecting either shipping or pick up and a location. Dismiss
Results per page:  16 | 32 | 48
Pneumatic Clamp,600 Lb
  • DE-STA-CO
  • Pneumatic Clamp, 600 Lb Pneumatic Clamp,600 Lb
  • Item # 3CXH9
  • Mfr. Model # 810-U
  • Pneumatic Hold Down Clamp, Holding Capacity 600 Lb, Material Steel, Operating Temp -14 to +195 F, Max Input...More

Vise,Cross
  • DAYTON
  • Vise, Cross Cross Vise
  • Item # 3W766
  • Mfr. Model # 3W766
  • Cross Vise, Fixed Base, Max. Travel 8 In. in Both X and Y Directions, Jaw Deflection 0.002 In. @ 2000 lbs,...More

Drill Press Vise,W 6 In,Open 6.75 In
  • DAYTON
  • Drill Press Vise, W 6 In, Open 6.75 In Quick Action Drill Press Vise
  • Item # 4CPG3
  • Mfr. Model # 4CPG3
  • Quick Action Drill Press Vise, Fixed Base, Jaw Width 6 In, Jaw Opening 6 3/4 In, Throat Depth 2 1/8 In,...More

Steel Drill Chuck, Keyed Chuck Type, Ball Bearing Bearing&#
Bench Vise,Stationary,6 In
  • WESTWARD
  • Bench Vise, Stationary, 6 In Bench Vise
  • Item # 10D745
  • Mfr. Model # 10D745
  • Bench Vise, General Purpose, Jaw Width 5-29/32 In., Max. Opening 6 In., Throat Depth 1-7/8 In., Overall...More

Parallel,Set,6 in.
  • PALMGREN
  • Parallel, Set, 6 in. Parallel,Set,6 in.
  • Item # 35MG53
  • Mfr. Model # 9638976
  • Parallel, Set, 6 In., For Use With Vises with 6 In. Wide Jaws, Features Precision Ground, Hardened From HTC...More

Collet Set w/Chuck,ER 25,10 Pcs
Bench Vise Slip Roll Kit
  • PALMGREN
  • Bench Vise Slip Roll Kit Bench Vise Slip Roll Kit
  • Item # 6CMW1
  • Mfr. Model # BM3
  • Bench Vise Slip Roll Kit, 17 x 25 x 5-1/2 In., For Use With Any 5 In. or Larger Bench Vise, Features 3...More

Rapid Indexer,3-3/16 in. dia.
Rapid Indexer,4 in. dia.
Vise,30 lb. Clamp Force
  • DAYTON
  • Vise, 30 lb. Clamp Force Vise,30 lb. Clamp Force
  • Item # 38MN09
  • Mfr. Model # 38MN09
  • Vise, Self Centering, Fixed Base, Jaw Deflection 0.006 In. At 2000 lb., Bed/Base High Tensile Strength Cast...More

Rotary Table,8 in. L
  • DAYTON
  • Rotary Table, 8 in. L Rotary Table,8 in. L
  • Item # 38NF08
  • Mfr. Model # 38NF08
  • Rotary Table,Mounting Position Either Horizontal or Vertical,Table Length 8 In.,Table Width 6-1/8 In.,Table...More

Webbed Angle Plate,8inD,9inH,Machined
Floor Stand,21 45 x 4-1/2 In
Machine Chuck,Independent,5,Adaptor Req
  • GATOR CHUCKS
  • Machine Chuck, Independent, 5, Adaptor Req Machine Chuck,Independent,5,Adaptor Req
  • Item # 14Y027
  • Mfr. Model # 1-302-0500
  • Machine Chuck, Independent, Height 2.21 In., Dia. 5 In., Capacity Max. 4.92 In., Capacity Min. (In.) 0.28,...More

Slip Roll Floor Stand, 50 In
Tool Holder,Mill,2.750 Projec
  • PARLEC
  • Tool Holder, Mill, 2.750 Projec Tool Holder,Mill,2.750 Projec
  • Item # 32UT67
  • Mfr. Model # H63-10EM4
  • Tool Holder, Mill, Projection Gage Line to Nose End (In.) 2.750, Overall Length (In.) 4-1/4, Nose 2.563 In.,...More

Cross Slide Vise,6 in Jaw Width
  • PALMGREN
  • Cross Slide Vise, 6 in Jaw Width Cross Slide Vise
  • Item # 41GP32
  • Mfr. Model # 9630601
  • Cross Slide Vise, Stationary Base, Max. Travel 3-1/2 In. x 4 In., Jaw Deflection 0.002 In. @ 2000 lbs, Jaw...More

Clamping Kit,11/16,5/8-11 Stud,52 Pcs
  • TE-CO
  • Clamping Kit, 11/16,5/8-11 Stud, 52 Pcs Clamping Kit,11/16,5/8-11 Stud,52 Pcs
  • Item # 2YGR1
  • Mfr. Model # 20415
  • Clamping Kit, Machinist, Number of Pieces 52, 11/16 T-Slots, For Use With 5/8-11 Stud Size, Workholding...More

Vise Base,Swivel,Slotted,15 in. L
Machine Vise,Swivel,4 In W,Open 4 In
  • PALMGREN
  • Machine Vise, Swivel, 4 In W, Open 4 In Machine Vise
  • Item # 4KXE7
  • Mfr. Model # 410B
  • Machine Vise, Swivel Base, Jaw Width 4 In, Jaw Opening 4 In, Throat Depth 1 3/4 In, Overall Length 12 1/8...More

Toolmakers Vise,2 x 2-3/8 x 1 In
  • PALMGREN
  • Toolmakers Vise, 2 x 2-3/8 x 1 In Angle Vise
  • Item # 19F403
  • Mfr. Model # 13162
  • Angle Vise, Stationary Base, Max. Travel 2-3/8, Jaw Deflection 0.0060 In., Jaw Plate Hardened And Ground,...More

Collet Chuck Adapter,ER 16
  • SANDVIK COROMANT
  • Collet Chuck Adapter, ER 16 Collet Chuck Adapter,ER 16
  • Item # 5KHZ6
  • Mfr. Model # C3-391.14-16 045
  • Collet Chuck Adapter, ER 16, Shank Type Coromant Capto(R), Shank Shape C3, Shank Dia. 0.394 In, Programming...More

Collet Chuck Adapter,ER 25
  • SANDVIK COROMANT
  • Collet Chuck Adapter, ER 25 Collet Chuck Adapter,ER 25
  • Item # 5KJE7
  • Mfr. Model # C4-391.14-25 052
  • Collet Chuck Adapter, ER 25, Shank Type Coromant Capto(R), Shank Shape C4, Shank Dia. 0.630 In, Programming...More

Collet Chuck Adapter,ER 20
  • SANDVIK COROMANT
  • Collet Chuck Adapter, ER 20 Collet Chuck Adapter,ER 20
  • Item # 5KHZ8
  • Mfr. Model # C3-391.14-20 045
  • Collet Chuck Adapter, ER 20, Shank Type Coromant Capto(R), Shank Shape C3, Shank Dia. 0.512 In, Programming...More

Hydraulic Toolholder,Standard,BT40
Hydraulic Toolholder,Standard,32mm in.
Hydraulic Toolholder,Standard,1.2500 in.
Results per page:  16 | 32 | 48
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More