Skip Content

Filter Results By

Item
Inside Dia.
Outside Dia.
For Use With
Price

Linear Rings and Seals

87 Results Found that Include 87 Products

Product availability based on selecting either shipping or pick up and a location. Dismiss
Results per page: 16 | 32 | 48
External Seal,ID 12 mm,OD 22 mm
Internal Retaining Ring,ID 12 mm
Double Seal,ID 0.375 In,OD 0.629 In
Retaining Ring,ID 0.500 In,OD 1.150 In
Seals, Inch
  • THOMSON
  • Seals, InchSeals, Inch
  • Item # 5KD17
  • Mfr. Model # S500
  • Seal, 0.125 Inch Thickness, 0.879 Inch Outer Diameter, For 0.500 Inch Ball Bushing Linear Bearing

Retaining Ring,ID 0.750 In,OD 1.620 In
Retaining Ring,ID 0.625 In,OD 1.510 In
Seals, Inch
  • THOMSON
  • Seals, InchSeals, Inch
  • Item # 5KD20
  • Mfr. Model # S1000
  • Seal, Use with Ball Bushing Number SUPER16, SSU16/162536, 0.187 Inch Thickness, 1.567 Inches Outer Diameter,...More

Seals, Inch
  • THOMSON
  • Seals, InchSeals, Inch
  • Item # 5KD19
  • Mfr. Model # S750
  • Seal, Use with Ball Bushing Number SUPER12, SSU12/122026, 0.125 Inch Thickness, 1.254 Inches Outer Diameter,...More

Double Seal,ID 1.000 In,OD 1.567 In
Double Seal,ID 1.250 In,OD 2.004 In
Double Seal,ID 0.625 In,OD 1.129 In
Retaining Ring,ID 1.000 In,OD 1.620 In
External Seal,ID 12 mm,OD 22 mm
Retaining Ring,ID 0.250 In,OD 0.550 In
External Seal,ID 8 mm,OD 16 mm
Retaining Ring,ID 30 mm,OD 43.50 mm
External Retaining Ring,ID 8mm,OD 14.7mm
Retaining Ring,ID 0.250 In,OD 0.550 In
Double Seal,ID 1.500 In,OD 2.379 In
Retaining Ring
  • THOMSON
  • Retaining RingRetaining Ring
  • Item # 5KC91
  • Mfr. Model # C1000
  • External Retaining Ring, Use with Ball Bushing Number SUPER16, SSU16/162536, 0.062 Inch Thickness, 1.620...More

Retaining Ring
  • THOMSON
  • Retaining RingRetaining Ring
  • Item # 5KC98
  • Mfr. Model # C750
  • External Retaining Ring, Use with Ball Bushing Number SUPER12, SSU12/122026, 0.050 Inch Thickness, 1.301...More

Double Seal,ID 0.750 In,OD 1.254 In
Retaining Ring,ID 0.750 In,OD 1.301 In
Retaining Ring,ID 12 mm,OD 20.50 mm
Retaining Ring,ID 0.375 In,OD 0.673 In
Internal Push Ring,ID 0.500 In
Double Seal,ID 0.500 In,OD 0.879 In
Retaining Ring, Inside Dia 1.000 In
Double Seal,ID 0.625 In,OD 1.129 In
Retaining Ring,ID 1.000 In,OD 2.040 In
Retaining Ring,ID 0.500 In,OD 1.150 In
Results per page: 16 | 32 | 48

Help protect ball bushing bearings with quality linear rings and seals from Grainger. Install internal retaining rings inside the housing bore at each end the bearing, and fit external retaining rings into the retaining ring grooves on the outside diameter of the bearing to help keep ball bushing bearings inside their housings. Double-acting seals help prevent contamination. Shop Grainger for linear rings and seals today.

Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More