Skip Content

Filter Results By

Item
  • View MoreView Less
Price
  • View MoreView Less
Shop By

Laboratory Mixer Accessories

67 Results Found that Include 67 Products 

Results per page: 16 | 32 | 48
Serial Cable for Enviro-Genie
  • GENIE
  • Serial Cable for Enviro-Genie
  • Item # 13R354
  • Mfr. Model # SI-1132
  • Serial Cable may be used to connect the Enviro-Genie to a computer via a serial port for data capture or...More

Double Sided Adh. Tape Roll
  • GENIE
  • Double Sided Adh. Tape Roll
  • Item # 13R373
  • Mfr. Model # SI-1616
  • Double Sided Adhesive Tape is an alternative to flask clamps or roller bars for securing vessels to shaker...More

Stackable Wire Rack for Enviro-Genie
  • GENIE
  • Stackable Wire Rack for Enviro-Genie
  • Item # 13R353
  • Mfr. Model # SI-1131
  • Stackable Wire Rack may be used in the Enviro-Genie and the Incubator-Genie to increase shelf space for use...More

Microplate Foam Insert,PK2
  • GENIE
  • Microplate Foam Insert, PK2
  • Item # 13R295
  • Mfr. Model # 504-0235-00
  • Two high-density foam inserts to accommodate one standard footprint microplate. This insert fits into the...More

6-inch Platform
  • GENIE
  • 6-inch Platform
  • Item # 13R293
  • Mfr. Model # 146-6005-00
  • Required for use with Microtube Foam Insert (Part No. 504-0234-00) and Microplate Foam Insert (Part No....More

Kit for PCR Plates for MicroPlate
  • GENIE
  • Kit for PCR Plates for MicroPlate
  • Item # 13R363
  • Mfr. Model # 0K-0400-901
  • These longer, stiffer bumpers replace the existing bumpers on the MicroPlate Genie, Digital MicroPlate Genie...More

Molded Bottom Closure and Screws Kit
  • GENIE
  • Molded Bottom Closure and Screws Kit
  • Item # 13R312
  • Mfr. Model # 0K-0236-408
  • Bottom Closure with Feet and (4) Screws. The Bottom Closure can be easily installed using either a 1/4 In....More

14-29mm Tube Foam Inserts,PK 2
  • GENIE
  • 14-29mm Tube Foam Inserts, PK 2
  • Item # 13R302
  • Mfr. Model # 503-0279-00
  • Two high-density Foam Inserts to accommodate 14-29mm diameter tubes. The insert fits into the Recessed...More

Horizontal 50ml Tube Holder
  • GENIE
  • Horizontal 50ml Tube Holder
  • Item # 13R313
  • Mfr. Model # SI-H506
  • Tube Holder holds six 50mL tubes horizontally. Holder snaps on to any Vortex-Genie 2 mixer and the...More

Vertical 50ml, 15ml, Microtube Holder
  • GENIE
  • Vertical 50ml, 15ml, Microtube Holder
  • Item # 13R319
  • Mfr. Model # SI-V525
  • Tube Holder holds six 50mL, six 15mL and twelve microtubes vertically. Holder snaps on to any Vortex-Genie 2...More

Disruptor Beads, 0.5mm, 8 oz. Bottle
  • GENIE
  • Disruptor Beads, 0.5mm, 8 oz. Bottle
  • Item # 13R343
  • Mfr. Model # SI-BG05
  • Eight ounce bottle of spherical lead free soda lime glass beads measuring 0.5mm diameter., For Use With...More

1 Clip Plate for 3 each 28-30mm tubes
  • GENIE
  • 1 Clip Plate for 3 each 28-30mm tubes
  • Item # 13R349
  • Mfr. Model # SI-1125
  • One metal clip plate to accommodate up to 3 tubes with a diameter of 28-30mm. A maximum of 8 clip plates, 4...More

Magnetic Bag Mounting Strips,PK16
  • GENIE
  • Magnetic Bag Mounting Strips, PK16
  • Item # 13R350
  • Mfr. Model # SI-1126
  • Pack of 16 stainless steel Bag Mounting Strips used to attach to the Magnetic Platform for use with the...More

Expansion Kit
  • GENIE
  • Expansion Kit
  • Item # 13R351
  • Mfr. Model # SI-1127
  • Two stainless steel Trays and 24 magnetic Bag Mounting Strips used to attach sealed bags to the Magnetic...More

3-inch Platform w o Rubber Cover
  • GENIE
  • 3-inch Platform w o Rubber Cover
  • Item # 13R308
  • Mfr. Model # 0K-0500-901
  • Replacement 3-inch (76mm) platform without rubber cover (Part No. 580-2013-00). This may be used on the...More

Clip Plates for Hybridization Tubes,PK2
  • GENIE
  • Clip Plates for Hybridization Tubes, PK2
  • Item # 13R352
  • Mfr. Model # SI-1130
  • Pack of 2 metal clip plates to accommodate one 35mm ID Hybridization Tube up to 300mm in length. This can be...More

250ml Flask Clamp
  • GENIE
  • 250ml Flask Clamp
  • Item # 13R369
  • Mfr. Model # SI-1612
  • Stainless Steel Flask Clamp for 250mL Flasks. Full platform capacity is 25 flask clamps. Use with...More

Rubber Cover for 3-Inch Platform
  • GENIE
  • Rubber Cover for 3-Inch Platform
  • Item # 13R309
  • Mfr. Model # 580-2013-00
  • Replacement rubber cover for the 3-in (76mm) platform (Part No. 0K-0500-901). This may be used on the...More

Horizontal Microtube Holder
  • GENIE
  • Horizontal Microtube Holder
  • Item # 13R315
  • Mfr. Model # SI-H524
  • Tube Holder holds twenty-four microtubes horizontally. Holder snaps on to any Vortex-Genie 2 mixer and the...More

1 Clip Plate for 100ml Volumetric Flasks
  • GENIE
  • 1 Clip Plate for 100ml Volumetric Flasks
  • Item # 13R357
  • Mfr. Model # SI-1136
  • Metal clip plate to accommodate up to 4 100-ml Volumetric Flasks. This can be attached to the Magnetic...More

500ml Flask Clamp
  • GENIE
  • 500ml Flask Clamp
  • Item # 13R370
  • Mfr. Model # SI-1613
  • Stainless Steel Flask Clamp for 500mL Flasks. Full platform capacity is 16 flask clamps. Use with...More

Microplate Adaptor Applied Biosystems
  • GENIE
  • Microplate Adaptor Applied Biosystems
  • Item # 13R310
  • Mfr. Model # SI-0513
  • Specified attachment for Applied Biosystems Microplate Protocols. Holds your Applied Biosystems' microplate...More

Vertical 50ml Tube Holder
  • GENIE
  • Vertical 50ml Tube Holder
  • Item # 13R316
  • Mfr. Model # SI-V506
  • Tube Holder holds six 50mL tubes vertically. Holder snaps on to any Vortex-Genie 2 mixer and the Vortex-Genie...More

3D Orbital Shaker Attachment for Roto
  • GENIE
  • 3D Orbital Shaker Attachment for Roto
  • Item # 13R358
  • Mfr. Model # SI-1150
  • The 3-D Orbital Shaker Attachment for the Roto-Shake Genie provides gentle yet thorough mixing of dishes,...More

1L Flask Clamp
  • GENIE
  • 1L Flask Clamp
  • Item # 13R371
  • Mfr. Model # SI-1614
  • Stainless Steel Flask Clamp for 1000mL Flasks. Full platform capacity is 9 flask clamps. Use with...More

Adhering Mat, Blue
  • GENIE
  • Adhering Mat, Blue
  • Item # 13R374
  • Mfr. Model # SI-1617
  • Blue adhering mat is an alternative to flask clamps or roller bars for securing vessels to shaker platform of...More

Replacement ElasticBands for SI-0513,PK2
  • GENIE
  • Replacement ElasticBands for SI-0513, PK2
  • Item # 13R311
  • Mfr. Model # 0K-0513-900
  • Elastic Bands for the Applied Biosystems Microplate Protocols. Holds the Applied Biosystems' Microplate on...More

Vertical 15ml Tube Holder
  • GENIE
  • Vertical 15ml Tube Holder
  • Item # 13R317
  • Mfr. Model # SI-V512
  • Tube Holder holds twelve 15mL tubes vertically. Holder snaps on to any Vortex-Genie 2 mixer and the...More

Non-Skid Tray for Roto-Shake Genie
  • GENIE
  • Non-Skid Tray for Roto-Shake Genie
  • Item # 13R359
  • Mfr. Model # 0A-1100-070
  • The Non-Skid Tray for the Roto-Shake Genie attaches to the Magnetic Platform (Part No. 0A-1100-030) to rock...More

Universal Microtube Holder
  • GENIE
  • Universal Microtube Holder
  • Item # 13R341
  • Mfr. Model # SI-0565
  • New and Improved removable Microtube Holder for use with the TurboMix Attachment (Part No. SI-0565) on the...More

1 Clip Plate for 12 each 10-13mm tubes
  • GENIE
  • 1 Clip Plate for 12 each 10-13mm tubes
  • Item # 13R347
  • Mfr. Model # SI-1123
  • One metal clip plate to accommodate up to 12 tubes with a diameter of 10-13mm. A maximum of 8 clip plates, 4...More

100ml Flask Clamp
  • GENIE
  • 100ml Flask Clamp
  • Item # 13R367
  • Mfr. Model # SI-1610
  • Stainless Steel Flask Clamp for 100mL Flasks. Full platform capacity is 36 flask clamps. Use with...More

Results per page: 16 | 32 | 48