Skip Content

Filter Results By

HITACHI

89 Results Found that Include 161 Products

Product availability based on selecting either shipping or pick up and a location. Dismiss
Results per page: 16 | 32 | 48
Cordless Screwdriver Kit,3.6 V
  • HITACHI
  • Cordless Screwdriver Kit, 3.6 VCordless Screwdriver Kit,3.6 V
  • Item # 36H232
  • Mfr. Model # DB3DL2
  • Cordless Screwdriver Kit, Battery Included / Bare Tool Battery Included, Voltage 3.6, Chuck Size 1/4 In., No...More

  • HITACHI
  • 18.0 Volt Battery Pack18.0 Volt Battery Pack
  • Multiple product options available

    Battery Pack, Battery Type Li-Ion, Features Overcharge and Over Discharge Protection and Charger Input Voltage 120VAC; Varies by Voltage, Battery Capacity and For Use...More

Cutoff Saw,12 In. Blade,1 In. Arbor
  • HITACHI
  • Cutoff Saw, 12 In. Blade, 1 In. ArborCutoff Saw,12 In. Blade,1 In. Arbor
  • Item # 19TA27
  • Mfr. Model # CC12Y
  • Handheld Cutoff Saw, Voltage 120, Blade Dia. 12 In., Arbor Size 1 In., 5000 No Load RPM, 15 Amps, Cutting...More

Spline Shank Rotary Hammer,8.4A @ 120V
  • HITACHI
  • Spline Shank Rotary Hammer, 8.4A @ 120VSpline Shank Rotary Hammer,8.4A @ 120V
  • Item # 5YAX2
  • Mfr. Model # DH38YE2
  • Rotary Hammer, Spline, Voltage 120, No Load RPM 510, Blows per Minute 2800, 8.4 Amps, Solid Bit Capacity...More

Air Siding Nailer,Full Rnd,15 Deg
  • HITACHI
  • Air Siding Nailer, Full Rnd, 15 DegAir Siding Nailer,Full Rnd,15 Deg
  • Item # 3EYU8
  • Mfr. Model # NV65AH
  • Air Siding Nailer, Angled, Full Round Head Style, Collation Angle 15 Degrees , Collation Type Wire/Plastic,...More

Air Roofing Nailer,15 Deg,Wire
  • HITACHI
  • Air Roofing Nailer, 15 Deg, WireAir Roofing Nailer,15 Deg,Wire
  • Item # 5GUT4
  • Mfr. Model # NV45AB2
  • Air Roofing Nailer, Straight, Collation Angle 15 Degrees , Collation Type Wire, Fastener Range 7/8 In. -...More

Air Finishing Stapler,1/4 In.,18 gauge
  • HITACHI
  • Air Finishing Stapler, 1/4 In., 18 gaugeAir Finishing Stapler,1/4 In.,18 gauge
  • Item # 3EYV1
  • Mfr. Model # N3804AB3
  • Air Finishing Stapler, Crown 1/4 In., Leg Length 1/2 to 1-1/2 In., Gauge 18, Magazine Capacity 100, CFM per...More

Chop Saw,14 In. Blade,1 In. Arbor
  • HITACHI
  • Chop Saw, 14 In. Blade, 1 In. ArborChop Saw,14 In. Blade,1 In. Arbor
  • Item # 19TA26
  • Mfr. Model # CC14SFS
  • Chop Saw, Voltage 120, Blade Dia. 14 In., Arbor Size 1 In., 4000 No Load RPM, 15 Amps, Cutting Capacity 5...More

Cordless Combination Kit Voltage 12.0, Li-Ion Number of Too
  • HITACHI
  • Cordless Framing Nailer KitCordless Framing Nailer Kit
  • Multiple product options available

    Cordless Framing Nailer Kit, Battery Included, Voltage 7.2, Fastener Range 2" - 3-1/2", Magazine Angled, Magazine Loading Rear, Depth Control Adjustable, Battery...More

Nibbler,9-7/8 In. L,3.5 lb,16 Ga
  • HITACHI
  • Nibbler, 9-7/8 In. L, 3.5 lb, 16 GaNibbler,9-7/8 In. L,3.5 lb,16 Ga
  • Item # 19TA28
  • Mfr. Model # CN16SA
  • Nibbler, Steel Capacity (Gauge) 16, Stainless Steel Capacity (Gauge) 64, 3.5 Amps @ 120V, Min. Cut Radius...More

Air Framing Nailer,Clipped,35 Deg,Paper
  • HITACHI
  • Air Framing Nailer, Clipped, 35 Deg, PaperAir Framing Nailer,Clipped,35 Deg,Paper
  • Item # 3CRL6
  • Mfr. Model # NR90ADPR
  • Air Framing Nailer, Angled, Clipped Head Style, Collation Angle 35 Degrees , Collation Type Paper, Fastener...More

Sliding Compound Miter Saw,9.2A,31 lb.
  • HITACHI
  • Sliding Compound Miter Saw, 9.2A, 31 lb.Sliding Compound Miter Saw,9.2A,31 lb.
  • Item # 5YAX5
  • Mfr. Model # C8FSE
  • Sliding Compound Miter Saw, Blade Dia. 8-1/2 In., Slide Yes, No Load RPM 5500, Crosscut @ 45 Deg. H 2-9/16...More

Pallet Nail, 2-1/4 In,PK9000
  • HITACHI
  • Pallet Nail, 2-1/4 In, PK9000Steel Collated Pallet Nail, Bright Finish
  • Item # 3EYY3
  • Mfr. Model # 12206
  • Pallet Nails, Full Round Head Style, Collation Configuration Coil, Collation Type Wire, Collation Angle 16...More

  • HITACHI
  • DrillDrill
  • Multiple product options available

    Multiple product options available

Cordless Die Grinder,12.0V
  • HITACHI
  • Cordless Die Grinder, 12.0VCordless Die Grinder,12.0V
  • Item # 22UM48
  • Mfr. Model # GP10DL
  • Cordless Die Grinder, Battery Included, Voltage 12.0, Battery Included 22UM60, Battery Pack Replacement...More

Demolition Hammer,1450 BPM,SDS Max
  • HITACHI
  • Demolition Hammer, 1450 BPM, SDS MaxDemolition Hammer,1450 BPM,SDS Max
  • Item # 19TA85
  • Mfr. Model # H55SC
  • Demolition Hammer, Amps @ 120V 10.4, Impact Energy (Ft.-Lb.) 11.8, Blows per Minute 1450, Drive System SDS...More

Cordless Tool Battery,12V,Li-Ion,1.5A/hr
Belt Sander, 3 in. x 21 in., 9A
  • HITACHI
  • Belt Sander, 3 in. x 21 in., 9ABelt Sander, 3 in. x 21 in., 9A
  • Item # 19TA21
  • Mfr. Model # SB8V2
  • Belt Sander, Belt Size (In.) 3 x 21, 820 to 1475 No Load SFPM, 9 Amps @ 120V, Lever Release Type, 9.0A, 1020W...More

  • HITACHI
  • Air Finish NailerAir Finish Nailer
  • Multiple product options available

    Air Finish Nailer, Collation Type: Adhesive and Varies by: Collation Angle, Fastener Range, Gauge, Head Style, Magazine Capacity, Tool Weight

Drywall Screwdriver,0 to 6000 RPM,1/4
  • HITACHI
  • Drywall Screwdriver, 0 to 6000 RPM, 1/4Drywall Screwdriver,0 to 6000 RPM,1/4
  • Item # 19TA51
  • Mfr. Model # W6VM
  • Clutch Standard, Speed Control VSR, Cord 24.6 ft., Bearings Dust Sealed, Drywall Screwdriver, Features 6.6A...More

Siding Nail, 2-1/4 In,PK3600
  • HITACHI
  • Siding Nail, 2-1/4 In, PK3600Steel Collated Coil Siding Nail, Hot Dipped Galvanized Finish
  • Item # 3EYZ1
  • Mfr. Model # 13367
  • Siding Nails, Full Round Head Style, Collation Configuration Coil, Collation Type Wire, Collation Angle 15...More

Drywall Screwdriver, 0 to 2600 RPM,1/4
  • HITACHI
  • Drywall Screwdriver, 0 to 2600 RPM, 1/4Drywall Screwdriver, 0 to 2600 RPM,1/4
  • Item # 19TA54
  • Mfr. Model # W6VB3
  • Clutch Standard, Speed Control VSR, Cord 24.6 ft., Bearings Dust Sealed, Drywall Screwdriver, Features...More

Drywall Screwdriver,0 to 1700 RPM,1/4
  • HITACHI
  • Drywall Screwdriver, 0 to 1700 RPM, 1/4Drywall Screwdriver,0 to 1700 RPM,1/4
  • Item # 19TA55
  • Mfr. Model # W8VB2
  • Clutch Standard, Speed Control VSR, Cord 24.6 ft., Bearings Dust Sealed, Drywall Screwdriver, Features Quiet...More

  • HITACHI
  • HITACHI Cordless DrillsHITACHI Cordless Drills
  • Multiple product options available

    Hitachi 2-speed cordless drills feature a 22-position clutch so you can choose the right amount of torque for your application. A bright LED helps you see your work when...More

Sander Polisher,7 In,11V,0 to 3400 RPM
  • HITACHI
  • Sander Polisher, 7 In, 11V, 0 to 3400 RPMSander Polisher,7 In,11V,0 to 3400 RPM
  • Item # 19TA23
  • Mfr. Model # SP18VA(H)
  • Sander Polisher, Size (In.) 7, No Load RPM 0 to 3400, Amps @ 120V 11.0, Spindle Thread Size (In.) 5/8-11,...More

Results per page: 16 | 32 | 48
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More