Round Drift Punch, Non Sparking, Non Marring, Tip Size 1/2 In, Hex 1/2 In, Length 8 In, 1 Piece Design, Knurled Grip, Brass Material, Complies With Federal Specification GGG-P-831E, ANSI Specification B209.2
Round Drift Punch, Non Sparking, Non Marring, Tip Size 1/2 In, Hex 1/2 In, Length 8 In, 1 Piece Design,...More
Pin Punch Set, Tip Size (In.) 3/32, 7/64, 5/32, 3/16, 15/64, 1/4, 5/16, 25/64, Length (In.) 6-3/32, 6-19/64, 6-1/2, 6-11/16, Steel Construction, Characteristics Soft Head For Safety, Will Mushroom, Not Chip, Application For Driving Out And Removing Pins And Keys
Long Drive Pin Punch, Length (In.) 8, Tip Size (In.) 5/32, Hex (In.) 3/8, Standard Tool(Accessory Needed for Tethering), Super Duty, Reverse Taper Design, S2 Steel Construction, Heat Treated for Greater Strength and Durability, Modified Parabolic Striking End to Reduce Mushrooming and Chipping, Black Oxide Finish to Prevent Rust Corrosion, Polished Identification Panel with Tool Number and Size, Driving Pins Out of Machinery or Other Materials, Meets/Exceeds ASME
Long Drive Pin Punch, Length (In.) 8, Tip Size (In.) 5/32, Hex (In.) 3/8, Standard Tool(Accessory Needed for...More
Pick up a variety of hand held punches from Grainger to add to your toolbox. Use a roll pin punch to help extract difficult-to-remove roll pins when performing machine or gun maintenance. Drive pin punches help you accurately drive pins without damaging the pin or the hole. For heavier-duty driving, try a drift pin punch that can help enlarge holes or align them prior to bolting or riveting metal parts. Shop Grainger today for hand held punches you can depend on!
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More