Skip Content

Filter Results By

Applied Filters Clear All

Dispensing Guns

37 Results Found that Include 44 Products

Product availability based on selecting either shipping or pick up and a location. Dismiss
Results per page:  16 | 32 | 48
Hot Melt Applicator,5/8 x 2in,2.6 lb./hr
  • 3M
  • Hot Melt Applicator, 5/8 x 2in, 2.6 lb./hr Hot Melt Applicator,5/8 x 2in,2.6 lb./hr
  • Item # 2JBX4
  • Mfr. Model # 89447
  • Hot Melt Applicator PG LT Quadrack(TM), 150 Watts, Voltage 120, 2.6 lbs/hour Feed, Glue Stick Capacity 5/8 x...More

  • Category : Glue Guns
EPx10to1 Mixing Nozzle,10to1 Ratio,PK36
Polyurethane Reactive Adh Ext Tip,PK3
Hot Melt Applicator 3 Hole,PK3
  • 3M
  • Hot Melt Applicator 3 Hole, PK3 Hot Melt Applicator 3 Hole,PK3
  • Item # 2JBN9
  • Mfr. Model # 21836
  • Hot Melt Applicator 3 Hole Spreader Tip, Accessory Part, For Use With 3M(TM) Scotch-Weld(TM) Hot Melt...More

  • Category : Glue Guns
Polyurethane Rctive Adh Power Cord
Hot Melt Applicator T Tip Assembly,PK3
Polyurethane Reactive Adh Wire Stnd
Polyurethane Reactive Adh Ext Tip,PK3
Polyurethane Rectv Adh Cplr End Cap
Polyurethane Rctv Adh Air Supply Ln
EPxMixing Nozzle,10to1 Ratio,PK1200
Hot Melt Applicator Pedal and Guard
Hot Melt Applicator Bench Mount PG II
EC Applicator,5/8x8in.,3.6 to 5.5 lb./hr
LT Applicator,5/8x2in.,2.6 to 3.5 lb./hr
  • 3M
  • LT Applicator, 5/8x2in., 2.6 to 3.5 lb./hr LT Applicator,5/8x2in.,2.6 to 3.5 lb./hr
  • Item # 4YX13
  • Mfr. Model # POLYGUN LT
  • LT Applicator, Size 5/8, Output 2.6 to 3.5 lb./hr., 150 Watts, Voltage 120, Glue Stick Capacity 5/8 In. x 2...More

  • Category : Glue Guns
Nozzle,Mixing,Pk12
Extension Tip,For 5E123, 5E124,PK3
TC Applicator,5/8x2in.,2.6 to 3.5 lb./hr
TC Benchstand
  • 3M
  • TC Benchstand TC Benchstand
  • Item # 3XH55
  • Mfr. Model # POLYGUN BENCH STAND
  • Glue Gun Stand, Item TC Benchstand, Application 5E123 Polygun EC and 5E124 Polygun TC and 4YX13 Polygun LT,...More

  • Category : Glue Guns
Nozzle Mixing Nozzle For Use With 10:1 Acrylic Adhesiv
AE II Applicator,1/2x12in,3.6to5.5lb./hr
  • 3M
  • AE II Applicator, 1/2x12in, 3.6to5.5lb./hr AE II Applicator,1/2x12in,3.6to5.5lb./hr
  • Item # 1VAK8
  • Mfr. Model # AE II
  • Hot Melt Adhesive Applicator, Electric AE II, 100 Watts, Voltage 110 VAC, 4 lbs/hour Feed, Trigger Advance...More

  • Category : Glue Guns
Epoxy Applicator For Use With 50mL Duo-Pak Cartridges
Hot Melt Applicator,1x3in,5.5to7.5lb./hr
Plunger Plunger For Use With 10:1 Acrylic Adhesives, 4
Applicator Pneumatic Applicator For Use With 490mL Cartridges
Tip,Mixing Nozzle,Pk12
Results per page:  16 | 32 | 48
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More