Skip Content

Filter Results By

Applied Filters Clear All

Dispensing Guns

38 Results Found that Include 44 Products

Product availability based on selecting either shipping or pick up and a location. Dismiss
Results per page:  16 | 32 | 48
Hot Melt Applicator,5/8 x 2in,2.6 lb./hr
  • 3M
  • Hot Melt Applicator, 5/8 x 2in, 2.6 lb./hr Hot Melt Applicator,5/8 x 2in,2.6 lb./hr
  • Item # 2JBX4
  • Mfr. Model # 89447
  • Hot Melt Applicator PG LT Quadrack(TM), 150 Watts, Voltage 120, 2.6 lbs/hour Feed, Glue Stick Capacity 5/8 x...More

Hot Melt Applicator 3 Hole,PK3
  • 3M
  • Hot Melt Applicator 3 Hole, PK3 Hot Melt Applicator 3 Hole,PK3
  • Item # 2JBN9
  • Mfr. Model # 21836
  • Hot Melt Applicator 3 Hole Spreader Tip, Accessory Part, For Use With 3M(TM) Scotch-Weld(TM) Hot Melt...More

EPxMixing Nozzle,10to1 Ratio,PK1200
EPx10to1 Mixing Nozzle,10to1 Ratio,PK36
Polyurethane Rectv Adh Cplr End Cap
Polyurethane Rctive Adh Power Cord
Polyurethane Reactive Adh Ext Tip,PK3
  • 3M
  • Polyurethane Reactive Adh Ext Tip, PK3 Polyurethane Reactive Adh Ext Tip,PK3
  • Item # 2JBN7
  • Mfr. Model # 89471
  • Polyurethane Reactive Adhesive Extension Tip, Replacement Part, Nozzle Type 0.072 In, For Use With 3M(TM)...More

Polyurethane Rctv Adh Air Supply Ln
Hot Melt Applicator T Tip Assembly,PK3
Polyurethane Reactive Adh Ext Tip,PK3
  • 3M
  • Polyurethane Reactive Adh Ext Tip, PK3 Polyurethane Reactive Adh Ext Tip,PK3
  • Item # 2JBN8
  • Mfr. Model # 89473
  • Polyurethane Reactive Adhesive Tip, Replacement Part, Nozzle Type 1/8 In, For Use With 3M(TM) Scotch-Weld(TM)...More

Polyurethane Reactive Adh Wire Stnd
Hot Melt Applicator Pedal and Guard
Hot Melt Applicator Bench Mount PG II
Nozzle,Mixing,Pk12
TC Applicator,5/8x2in.,2.6 to 3.5 lb./hr
  • 3M
  • TC Applicator, 5/8x2in., 2.6 to 3.5 lb./hr TC Applicator,5/8x2in.,2.6 to 3.5 lb./hr
  • Item # 5E124
  • Mfr. Model # POLYGUN TC
  • Glue Gun, Touch Control Applicator for High Temperature Adhesives, 150 Watts, Voltage 120, 3-1/2 lbs/hour...More

LT Applicator,5/8x2in.,2.6 to 3.5 lb./hr
  • 3M
  • LT Applicator, 5/8x2in., 2.6 to 3.5 lb./hr LT Applicator,5/8x2in.,2.6 to 3.5 lb./hr
  • Item # 4YX13
  • Mfr. Model # POLYGUN LT
  • LT Applicator, Size 5/8, Output 2.6 to 3.5 lb./hr., 150 Watts, Voltage 120, Glue Stick Capacity 5/8 In. x 2...More

EC Applicator,5/8x8in.,3.6 to 5.5 lb./hr
Extension Tip,For 5E123, 5E124,PK3
  • 3M
  • Extension Tip, For 5E123, 5E124, PK3 Extension Tip,For 5E123, 5E124,PK3
  • Item # 3XH56
  • Mfr. Model # 9946
  • Hot Melt Applicator Tip, Extension, Nozzle Type Brass, For Use With PG II AND PG II LT APPLICATORS, 2JBG7,...More

TC Benchstand
  • 3M
  • TC Benchstand TC Benchstand
  • Item # 3XH55
  • Mfr. Model # POLYGUN BENCH STAND
  • Glue Gun Stand, Item TC Benchstand, Application 5E123 Polygun EC and 5E124 Polygun TC and 4YX13 Polygun LT,...More

Nozzle Mixing Nozzle For Use With 10:1 Acrylic Adhesiv
AE II Applicator,1/2x12in,3.6to5.5lb./hr
  • 3M
  • AE II Applicator, 1/2x12in, 3.6to5.5lb./hr AE II Applicator,1/2x12in,3.6to5.5lb./hr
  • Item # 1VAK8
  • Mfr. Model # AE II
  • Hot Melt Adhesive Applicator, Electric AE II, 100 Watts, Voltage 110 VAC, 4 lbs/hour Feed, Trigger Advance...More

Epoxy Applicator For Use With 50mL Duo-Pak Cartridges
Plunger Plunger For Use With 10:1 Acrylic Adhesives, 4
Tip,Mixing Nozzle,Pk12
  • 3M
  • Tip, Mixing Nozzle, Pk12 Tip,Mixing Nozzle,Pk12
  • Item # 5AB58
  • Mfr. Model # 04901
  • Application Dispensing and Mixing Two-Part Adhesives and Epoxy;Blunt End Non-Tapered Mix Tip ;For Use With...More

Manual Applicator For Use With 200mL Duo-Pak Cartridges
Hot Melt Applicator,1x3in,5.5to7.5lb./hr
Conversion Kit, 200 mL
  • 3M
  • Conversion Kit, 200 mL Conversion Kit, 200 mL
  • Item # 2JCF8
  • Mfr. Model # 31385
  • EPX 10:1 Conversion Kit, 10:1 Mixing Ratio, For Use With Pneumatic Applicator, Converts 200mL Pneumatic...More

Manual Applicator Plunger,200mL
Results per page:  16 | 32 | 48
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More