Grainger offers a wide range of conveyor systems that can benefit your material handling and packaging needs. Instead of using strenuous labor, a gravity conveyor can safely and effectively transport materials to and from any location. Easily expandable and portable, these conveyors can be shaped and installed anywhere. During the assembly line, a ball transfer table allows workers to easily rotate heavy products and gain access to all sides with minimal effort. If you need conveyor rollers or other replacement conveyor parts, you can find them at Grainger.
Conveyor Best Sellers
- ASHLAND CONVEYORItem # 24K759
- UNITED SALESItem # 22FA25
- GRAINGER APPROVEDItem # 5W814
- ASHLAND CONVEYORItem # 1VBK2
- ASHLAND CONVEYORItem # 1PDF9
- ASHLAND CONVEYORItem # 1VBF5
- ASHLAND CONVEYORItem # 4W570
- TANISItem # 1VKY5
- ASHLAND CONVEYORItem # 2WJT5
- GRAINGER APPROVEDItem # 5W812
- UNITED SALESItem # 22FA46
- ASHLAND CONVEYORItem # 1VAX3
- GRAINGER APPROVEDItem # 2WJL7
- ASHLAND CONVEYORItem # 2WJU2
- ASHLAND CONVEYORItem # 42X944
Ask your questions. Share your answers.
A jam light, horn or indication on an HMI is generally used to indicate the presence of a jam. A yellow or amber beacon is most common in the industry.
When a jam is detected, turn off the conveyor with the jammed cartons. Conveyors upstream must be turned off as well. It is best, if possible, to keep downstream conveyors running. The purpose of this is to make it easier for workers to clear a jam because the can push boxes towards the running conveyor to get them out of the way as they clear the jam. This is especially useful when the cartons are heavy or the conveyor is elevated.
Lastly, it is a good idea to place a jam reset push-button near the location of the jam. This prevents the operators from having to walk to the main control panel, which could be a great distance away.
Be aware.. typically, jam sensors are placed perpendicular to the conveyor in order for them to detect very small gaps between cartons. This is important for a high throughput system.
Also, depending on system design, slugs of cartons my create a false jam. There are several ways around this, and it is very dependent on system design and configuration.
Ask and Answer Disclaimer:
Grainger is neither responsible for, not does it endorse, the content of any statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger.
The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any statements posted, including statements posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such statements.
Use of any linked web site provided in a post is at the user's own risk. This site should not replace the use by you of any technical product manual or other professional resource or adviser available to you.
The source for the answers given by Grainger in Ask and Answer are based on the information provided with the question, which may not be complete or may not apply to other situations, and based on product literature and informational materials, the content of which is provided by Grainger's product suppliers. Grainger disclaims liability for any information it provides in Ask and Answer which later may be alleged or determined by a court of law to be inaccurate or incorrect.
The answers given by Grainger in Ask and Answer are not intended to replace or supplement any professional, engineering or other consultation services available to its product users. Always read, understand, and follow the product information and instructions provided by the manufacturer. same on category AAA as well