Skip Content

Filter Results By

Bus Plugs

9 Results Found that Include 208 Products

Product availability based on selecting either shipping or pick up and a location. Dismiss
Results per page:  16 | 32 | 48
Busway,Fusible Type
  • SQUARE D
  • Busway, Fusible Type Busway,Fusible Type
  • Busway Plug In Unit, Amps 400, Voltage 240/600VAC, Number of Poles 3, Fusible, 3 Phase, 4 Wire with Ground, Enclosure Rating NEMA 1, Fuse Class H, K, R, Breaker Type PBQ, For Use With I-Line and I-Line II Busway, Height 42 In., Width 21 In., Depth 13-3/4 In., Standards UL Listed, CSA Certified

  • Item # 2EJ47
  • Mfr. Model # PBQ4640G
  • Busway Plug In Unit, Amps 400, Voltage 240/600VAC, Number of Poles 3, Fusible, 3 Phase, 4 Wire with Ground,...More

  • SQUARE D
  • SQUARE D Floor Operable Disconnects SQUARE D Floor Operable Disconnects
  • Multiple product options available

    These quick-make, quick-break units plug into the Square D I-Line and I-Line II busway. Standard provisions are for Class H fuses; conversion to Class J fuse spacing requires relocating the load side fuse assembly to an alternate position. Units are UL Listed, CSA Certified, and reject all but Class R fuses when Class R fuse kits are installed.

    Multiple product options available

  • SIEMENS
  • SIEMENS Bus Plugs SIEMENS Bus Plugs
  • Multiple product options available

    These bus plugs have a NEMA 1 enclosure that protects against light, larger particulate, and indirect splashing; won't keep out persistent particles such as dirt or oil.

    Multiple product options available

Busway Tap Box,100A,240V,3Pol,3 W,3Ph,TB
  • SQUARE D
  • Busway Tap Box, 100A, 240V, 3Pol, 3 W, 3Ph, TB Busway Tap Box,100A,240V,3Pol,3 W,3Ph,TB
  • Busway Tap Box, Amps 100, Voltage 240VAC, Number of Poles 3, Nonfusible, 3 Phase, 3 Wire, Enclosure Rating NEMA 1, Breaker Type TB, For Use With Powerbus(TM) 225 Busway, Height 10-3/4 In., Width 10 In., Depth 3-3/4 In., Standards UL Listed, CSA Certified

  • Item # 2EHY4
  • Mfr. Model # PBPTB3A100
  • Busway Tap Box, Amps 100, Voltage 240VAC, Number of Poles 3, Nonfusible, 3 Phase, 3 Wire, Enclosure Rating...More

  • SQUARE D
  • SQUARE D Fusible Bus Plugs SQUARE D Fusible Bus Plugs
  • Multiple product options available

    UL listed units plug into Square D I-Line and I-Line II busway. Standard provisions are for Class H fuses; conversion to Class J fuse spacing requires relocating the load side fuse assembly to an alternate position. Units are CSA certified, and reject all but Class R fuses when Class R fuse kits are installed.

    Multiple product options available

Results per page:  16 | 32 | 48

If you need to add devices and machinery to your electrical bus, a bus plug will help you do so without major rewiring. Fusible bus plugs install into your main bus and provide room for additional fuses and circuit breakers. So you can wire new components into the system without risking short circuits, surge damage or overloads. Choose from bus plugs with voltage ratings from 120 to 600 volts bus plugs at a range of amperages for industrial factories and buildings. Install a bus plug with our electrical busways and electrical panels to upgrade your system today.

Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More