Skip Content

Filter Results By

Beam Clamps

37 Results Found that Include 37 Products

Product availability based on selecting either shipping or pick up and a location. Dismiss
Results per page: 16 | 32 | 48
Beam Clamp,3/8 in,Electrogalvanized,PK25
Beam Clamp,1 in.,Malleable Iron,Pk50
  • GRAINGER APPROVED
  • Beam Clamp, 1 in., Malleable Iron, Pk50Beam Clamp,1 in.,Malleable Iron,Pk50
  • Item # 3KF30
  • Mfr. Model # 3KF30
  • Electroplated Beam Clamp, Hole Size 1/4-20 Inch, Jaw Opening 3/4 Inch, Load Rating 125 Pounds, Material of...More

Beam Clamp,1/4 in.,Malleable Iron,PK50
Beam Clamp,Up to 1/2 in. Jaw Opening
  • CADDY
  • Beam Clamp, Up to 1/2 in. Jaw OpeningBeam Clamp,Up to 1/2 in. Jaw Opening
  • Item # 2KWY1
  • Mfr. Model # BC
  • Beam Clamp, Hole Size Threaded 1/4 In, Jaw Opening Up to 1/2 In, Load Rating 100 Lb, Flange Width Up to 1/2...More

Beam Clamp,1/4 in.,Brite,1-5/32 in.,SS
Beam Clamp,2-1/2 In.,1-5/16 in.,Pk10
  • GRAINGER APPROVED
  • Beam Clamp, 2-1/2 In., 1-5/16 in., Pk10Beam Clamp,2-1/2 In.,1-5/16 in.,Pk10
  • Item # 3LK73
  • Mfr. Model # 3LK73
  • Electroplated Beam Clamp, Hole Size 1/2-13 Inch, Jaw Opening 1-5/16 Inches, Load Rating 600 Pounds, Material...More

Beam Clamp,1 in,Steel,Electroplated,Pk50
Beam Clamp,1/2 to 3/4 in.,3 Layer Finish
  • CADDY
  • Beam Clamp, 1/2 to 3/4 in., 3 Layer FinishBeam Clamp,1/2 to 3/4 in.,3 Layer Finish
  • Item # 2KWY2
  • Mfr. Model # BC812M
  • Beam Clamp, Conduit/Pipe Below, Nominal Conduit/Pipe 1/2 to 3/4 In, Hole Size Threaded 1/4 In, Jaw Opening Up...More

Beam Clamp,1/2 in.,Zinc Phosphate Finish
  • B-LINE by Eaton
  • Beam Clamp, 1/2 in., Zinc Phosphate FinishBeam Clamp,1/2 in.,Zinc Phosphate Finish
  • Item # 4RHK8
  • Mfr. Model # BC1
  • Beam Clamp, Hole Size Threaded 1/4 In., Jaw Opening Up to 1/2 In., Load Rating 100 Lb., Flange Width Up to...More

Beam Clamp,3/8 in.,Malleable Iron,PK25
Right Angle Clamp,Beam,3/4 in.,Pk50
Beam Clamp,2 in.,Electroplated,Pk25
  • GRAINGER APPROVED
  • Beam Clamp, 2 in., Electroplated, Pk25Beam Clamp,2 in.,Electroplated,Pk25
  • Item # 3KF31
  • Mfr. Model # 3KF31
  • Electroplated Beam Clamp, Hole Size 3/8-16 Inch, Jaw Opening 31/32 Inch, Load Rating 300 Pounds, Material of...More

Beam Clamp,1/2 to 3/4 in.,Spring Steel
  • B-LINE by Eaton
  • Beam Clamp, 1/2 to 3/4 in., Spring SteelBeam Clamp,1/2 to 3/4 in.,Spring Steel
  • Item # 4RHV7
  • Mfr. Model # BG-8-12-C2
  • Beam Clamp, Nominal Conduit/Pipe 1/2 to 3/4 In., Hole Size Threaded 1/4 In., Jaw Opening Up to 1/2 In., Load...More

Right Angle Beam Clamp,1-1/2 in.,Pk50
Beam Clamp,Electroplated,2 in.,Pk50
Beam Clamp,1 in.,Malleable Iron,Pk50
Beam Clamp,1/2 in.,Electroplated,Pk50
Parallel Beam Clamp,1 in.,316 SS,Brite
Clamp Back,1 in.,316 SS,Brite Finish
Beam Clamp,1/2 in.,1-37/64 in.,Brite
Clamp Back,3/4 in.,316 SS,Brite Finish
Beam Clamp,1-1/4 in.,Electroplated,Pk50
Beam Clamp,5/16 in.,Malleable Iron,PK50
Clamp Back Spacer,1/2 to 1 in.,316 SS
Right Angle Beam Clamp,2-1/2 in.,316 SS
Right Angle Clamp,3/4 in.,316 SS,Brite
Beam Clamp,3/8 In.,Brite,1-1/2 In.,SS
Right Angle Beam Clamp,1-1/4 in,316 SS
Right Angle Beam Clamp,3 in.,Brite
Right Angle Beam Clamp,2 in.,316 SS
Right Angle Clamp,1/2 In.,316 SS,Brite
Right Angle Beam Clamp,1 in,Brite Finish
Results per page: 16 | 32 | 48

A beam clamp from Grainger is a must-have when installing conduit in industrial locations. Use beam clamps instead of pipe clamps as a conduit hanger on an exposed metal beam, steel girder or strut channel. This allows the installation of EMT and conduit in warehouses, factories and steel buildings when conventional conduit mounting techniques are unavailable. For a temporary or permanent solution to a problematic conduit installation, choose a beam clamp from Grainger.

Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More