For A Clean Installation Of The Intake And Exhaust Pipes Of The Condensing Tankless Water Heater, Fits 3" PVC, ABS, Piping (1)
For Upgrading Water Heaters From Electric To Gas In Renovations Or New Construction Where No Chimney Exists (2)
Upgrade Water Heaters from Electric to Gas or in New Construction Where No Chimney Exists (2)
Venting Rinnai Tankless Water Heaters (24)
Allows 45 Degree Bend (2)
Allows 90 Degree Bend (2)
Allows For Adjustable Vent Length (7)
Allows Single Penetration Through Roof For Both Intake And Exhaust (3)
Allows Single Penetration Through Wall For Both Intake And Exhaust (6)
Allows Venting Up to 50 Feet away from a Side Wall (2)
Allows Venting Up to 75 Feet away from a Side Wall (2)
Covers Gap Between Wall And Vent Pipe (1)
Prevents Condensate From Draining Back Into The Appliance (1)
Provides Clearance For Through The Wall Installations (1)
Secures Vent System (1)
12 Inch All-Weather Termination, 90 Degree Elbow And Wall Plates (1)
12 Inch Condensing Termination, 90 Degree Elbow And Wall Plates (1)
12 Inch Standard Horizontal Termination, 90 Degree Elbow And Wall Plates (1)
21 Inch All-Weather Termination, 90 Degree Elbow And Wall Plates (1)
21 Inch Condensing Termination, 90 Degree Elbow And Wall Plates (1)
Fan with 3" Inlet and Outlet, Factory Wired With 25-Ft. Control Cable, Linear Limit Spill Switch, Post-purge Timer (Keeps Unit Operating at End of Burner Cycle), Gas Diaphragm Switch with Aluminum Tube Connection, and Heavy Duty 3" Vent Hood. (1)
Fan with 4" Inlet and Outlet, Factory Wired With 25-Ft. Control Cable, Linear Limit Spill Switch, Post-purge Timer (Keeps Unit Operating at End of Burner Cycle), Gas Diaphragm Switch with Aluminum Tube Connection, and Heavy Duty 4" Vent Hood. (1)
Pipe Clamp (3)
Power Venter With 4" Inlet And Outlet, Pre-Wired With 40 Ft Of #18-4 Copper Wire (24 V) To Minimize Field Connections, Vibration Isolators And Mounting Hardware (1)
Power Venter With 6" Inlet And Outlet, Pre-Wired With 40 Ft Of #18-4 Copper Wire (24 V) To Minimize Field Connections, Vibration Isolators And Mounting Hardware (1)
Your web browser does not have JavaScript enabled. In order to use most of the functionality of this website, you will need to have JavaScript enabled in your browser.
Browser Cookies Are Disabled
Your web browser does not have Cookies enabled. In order to use most of the functionality of this website, you will need to have cookies enabled in your browser.
Get this item now!
Choose your preferred shipping method or pick-up branch during Checkout.
Please enter a quantity and ZIP code above to check availability.
Product availability is real-time and adjusted continuously. This product will be reserved for you when you complete your order. If your organization requires order approval, the product will be reserved once Grainger receives the final approved order based on product availability at that time.
Use high-quality water heater vents from Grainger to help provide proper ventilation for your natural gas, LP or oil-fired hot water heater. Choose from side wall vent packages, 45 Degrees and 90 Degrees pipe elbows, roof discharge terminations, vent pipe extensions and more. Find ventilation kits to help upgrade water heaters from electric to gas in renovations or new construction where no chimney exists. Trust Grainger to provide water heater vents for both tankless and storage type water heaters.
If the settings on your account have changed since this order was submitted, they will be updated when this order is approved.
Pricing and availability are not confirmed until the order is processed. Promotional pricing and offers associated with this order will only apply if the order is approved within the timeframe of the promotion.