enabled in your browser.
Comparative Noise and Light Levels
The potential for dangerous noise levels and harmful light levels exists in many day-to-day personal and workplace activities. The following information provides a better understanding of the comparative noise and light levels to a number of locations and applications.
|Home Products, Etc.||Approx. Levels in dB|
|Mowing the lawn||86|
|Car at 60 mph||72|
|Toy cap gun||163|
|Industrial/Work Activities||Approx. Levels in dB|
|Busy big-city traffic||95|
|Jet engine at 1000 feet away||102|
Hearing loss (recordable or reportable) is addressed under OSHA in 29 CFR 1904. According to the OSHA regulation, hearing protectors must be made available to workers exposed at or above the action level of 85 dB. OSHA requires that hearing protectors be provided and worn by employees when:
- Noise exposures exceed 90 dB
- Employees are exposed to greater than 85 dB and have not yet had a baseline audiogram or have experienced a standard threshold shift (loss of hearing)
|Industrial Tasks and Locations||Suggested Foot-Candle*|
|Assembly line inspection||200|
* Illumination levels are suggested and intended to be a minimum on the task referenced. To assure these values at all times, higher initial levels should be provided as required per task.
Commonly Asked Questions
|Q.||What are three indicators that I might be exposed to too much noise?|
|Q.||When can a person begin experiencing hearing pain?|
|A.||Depending on an individual's hearing sensitivity, a person can begin experiencing hearing pain between 125 and 160 dB.|
|Q.||When does OSHA require employers to implement a hearing conservation program?|
|A.||In the United States, whenever employee noise exposures equal or exceed an eight-hour time-weighted average sound level of 85 dB. For more information, see Quick Tips #260: Effective Hearing Conservation Program Elements.|
|Q.||What are three forms of hearing protection?|
|A.||Earplugs, earmuffs and hearing bands.|
Pattys Industrial Hygiene & Toxicology, Third Revised Edition, 1978.
Safety Technicians Handbook, Webber Publishing, 1996.
Lab Safety Supply Insights, May 1992 Volume 1, Issue 1.
Plant Engineering, July 18, 1991.
Find even more information you can use to help make informed decisions about the regulatory issues you face in your workplace every day. View all Quick Tips Technical Resources at www.grainger.com/quicktips.
Think Safety. Think Grainger.SM
Rely on North America's largest supplier of safety products. You'll also find a network of safety resources that help you stay in compliance and protect employees from hazardous situations. Count on Grainger for lockout tagout, fall protection equipment, confined space products, safety signs, personal protective equipment (PPE), emergency response and so much more!
The information contained in this publication is intended for general information purposes only. This publication is not a substitute for review of the applicable government regulations and standards, and should not be construed as legal advice or opinion. Readers with specific questions should refer to the cited regulation or consult with an attorney.