Digital control and display of speed from 500-3000 and time for touch is 1-99 seconds, 1-99 minutes for hands-free, or continuous. Use in cold room or incubator, zinc die casting, weight is 9 pounds. (1)
Digital control and display of speed from 500-3000 and time for touch is 1-99 seconds, 1-99 minutes for hands-free, or continuous. Unit is equipped with a microplate holder designed for Applied Biosystems microplate protocols. (1)
Digital control and display. For low speed applications. Set speed range from 50-300 RPM and time from 1-99 minutes or continuous, holds up to one 38 liter container, use stir bar maximum length 3 inches (1)
Digital control and display. Set speed range from 250-1300 RPM and time from 1-99 minutes or continuous, holds up to four 2 Liter containers, use stir bar maximum length 2 inches, ABS/Polycarbonate housing (1)
Digital control and display. Set speed range from 250-1300 RPM and time from 1-99 minutes or continuous, holds up to one 38 liter container, use stir bar maximum length 3 inches, ABS/Polycarbonate housing (1)
Digital control of speed between 1000 to 3000 RPM, time between 1 to 99 minutes or continuous, speed alarm. Includes microtube holder for 1.5 and 2.0 milliliter tubes, Use in cold room or incubator. Use as high speed vortexer with pop-off cup supplied. (1)
High speed range from 750-3200 RPM, 1.0 millimeter orbit, timer 1-60 minutes or continuous, max capacity is any four microplates of standard footprint, up to 8 with optional tray (1)
High speed range from 750-3200 RPM, 1.0 millimeter orbit, timer 1-60 minutes or continuous, max capacity is any one microplate of standard footprint (1)
High speed stirring. Analog speed range 250-1300 RPM, holds up to four 2 Liter containers, use stir bar maximum length 2 inches, ABS/Polycarbonate housing (1)
Includes platform with retaining bands, platform measures 10 by 10 inches, rotating speed is 5-35 RPM, no additional accessories necessary. (1)
Integrated timer 1-60 seconds for touch operation, 1-60 minutes for hands-free operation, or continuous, unit automatically stops at end of set time, variable speed control from 600 to 3200 RPM, zinc die casting, weight is 9 pounds. (1)
Platform for various flask clamps sold separately, digital control and display of speed between 10-300 RPM including Stir Reverse, time between 1 minute to 99 hours with alarm or continuous and ramp rate (1)
Platform has adhering rubber mat, digital control and display of speed between 10-300 RPM including Stir Reverse, time between 1 minute to 99 hours with alarm or continuous and ramp rate (1)
Profiles mode can save up to 4 profiles including speed, ramp rate, stir direction, time, pause time, and power level. Speed 10-1800 RPM. Four positions, max sitr capacity is 1 Liter each (1)
Profiles mode can save up to 4 profiles including speed, ramp rate, stir direction, time, pause time, and power level. Speed 10-1800 RPM. Max sitr capacity is 2 Liters (1)
Pulse "ON/OFF" from 0.1 seconds to 99 minutes, digital control and display of speed from 500-3000 RPM, and time from 1-99 minutes or continuous. Use with all Vortex-Genie accessories. (1)
Single high speed touch mixing only, large 6 millimeter orbit, may be used with pop-off cup supplied or optional 3 inch platform., may be used in cold room or incubator. (1)
Speed range from 250-1300 RPM, holds up to one 38 liter container, use stir bar maximum length 3 inches, ABS/Polycarbonate housing (1)
Supplied with a magnetic platform which can be loaded on both sides with clip plates sold separately, rotator speed is 5-35 RPM. (1)
Supplied with three clamps for two rows, digital control and display of speed between 10-300 RPM including Stir Reverse, time between 1 minute to 99 hours with alarm or continuous and ramp rate (1)
Supplied with two 12 pack multi-tube racks holding up to 24 tubes, or up to six 250 millileter containers. Digital control and display of speed between 250-1000 RPM, and time 1-99 minutes or continous, heavy zinc die unit weighs 25 pounds. (1)
Switches from rocker to rotator. Additional clip plates available that attach magnetically and can be place in various angles on magnetic platform, speed for rotating is 5 to 35 RPM, rocking is 10 to 70 cycles per minute (1)
Temperature range 28 to 75 celsius. Magnetic platform changes from rotating to rocking. Rotator speed 1-35 RPM, rocker 2-70 cycles per minute, weighs 80 pounds. Additional accessories available. (1)
Temperature range 4 to 75 celsius. Magnetic platform changes from rotating to rocking. Rotator speed 1-35 RPM, rocker 2-70 cycles per minute, magnetic stirrer speed 1-2000 RPM, weighs 80 pounds. Additional accessories available. (1)
Variable speed control from 600 to 3200 RPM, hands-free or touch operation, use in cold room or incubator, zinc die casting, weight is 9 pounds, ETL, CE (1)
Your web browser does not have JavaScript enabled. In order to use most of the functionality of this website, you will need to have JavaScript enabled in your browser.
Browser Cookies Are Disabled
Your web browser does not have Cookies enabled. In order to use most of the functionality of this website, you will need to have cookies enabled in your browser.
Get this item now!
Choose your preferred shipping method or pick-up branch during Checkout.
Please enter a quantity and ZIP code above to check availability.
Product availability is real-time and adjusted continuously. This product will be reserved for you when you complete your order. If your organization requires order approval, the product will be reserved once Grainger receives the final approved order based on product availability at that time.
If the settings on your account have changed since this order was submitted, they will be updated when this order is approved.
Pricing and availability are not confirmed until the order is processed. Promotional pricing and offers associated with this order will only apply if the order is approved within the timeframe of the promotion.