Accepts up to 4 10mm-17mm diameter tubes or ampules (1)
Accepts up to four 15mm-17mm diameter tubes or ampules (1)
Bottom Closure with Feet and (4) Screws. The Bottom Closure can be easily installed using either a 1/4" nut driver or pliers. The length of this Bottom Closure is 6-inches (1)
Consists of a 6-in (152mm) Platform (Part No. 146-6005-00), Microtube Foam Insert (Part No. 504-0234-00) and Microplate Foam Insert (Part No. 504-0235-00). Accommodates either 60 microtubes or one standard footprint microplate, respectively (1)
Eight ounce bottle of spherical lead free soda lime glass beads measuring 0.1mm diameter. (1)
Eight ounce bottle of spherical lead free soda lime glass beads measuring 0.5mm diameter. (1)
Elastic Bands for the Applied Biosystems Microplate Protocols. Holds the Applied Biosystems' Microplate on the adaptor (1)
Extra ratcheting clamp for additional rows for Orbital-Genie (1)
High-density Foam Inserts for each of the following: 9-16mm Tubes, 14-29mm Tubes, 29-37mm Tubes. A Blank Foam Insert is also included for user customization. Each insert fits into the Recessed Platform (Part No. 504-0039-00) (1)
Magnetic Platform. Supplied with SI-220X. Can also be used on SI-210X. Will accept a variety of clip plates sold separately (1)
Metal clip plate to accommodate up to 4 100-ml Volumetric Flasks. This can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Rotator Genie, Enviro-Genie or Incubator-Genie (1)
Pack of 2 clip plates with two elastic bands each for use with odd-shapped sample vessels. This can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Rotator Genie, Enviro-Genie or Incubator-Genie (1)
Pack of 2 metal clip plates to accommodate one 35mm ID Hybridization Tube up to 300mm in length. This can be attached to the Magnetic Platform for use with the Roto-Shake Genie, Rotator Genie, Enviro-Genie or Incubator-Genie (1)
Plastic pop-off cup for mixing and vortexing in single tubes. The pop-off cup may be used on the Vortex-Genie 1, Disruptor Genie, Vorex-Genie Pulse and the Vortex-Genie 2 family of mixers (1)
Platform necessary for use with Foam Inserts (Part Nos. 503-0278-00, 503-0279-00, 503-0280-00, 503-0277-00) or Elastic Bands (Part No. 568-0001-00) (1)
Replacement 3-inch (76mm) platform without rubber cover (Part No. 580-2013-00). This may be used on the Vortex-Genie 1, Vortex-Genie Pulse and the Vortex-Genie 2 family of mixers (1)
Replacement rubber cover for the 3-in (76mm) platform (Part No. 0K-0500-901). This may be used on the Vortex-Genie 1, Vortex-Genie Pulse and the Vortex-Genie 2 family of mixers (1)
Required for use with Microtube Foam Insert (Part No. 504-0234-00) and Microplate Foam Insert (Part No. 504-0235-00) and Two-Tier Microplate Foam Insert (SI-0510) (1)
Serial Cable may be used to connect the Enviro-Genie to a computer via a serial port for data capture or programming. It is a standard 9-pin, female to female straight through serial cable (1)
Set of two Tube Racks to hold up to 24 tubes total for the Multi Vortex-Genie. Accommodates tubes of any material type, up to 29mm diameter (1)
Specified attachment for Applied Biosystems Microplate Protocols. Holds your Applied Biosystems' microplate in place on any of the Vortex-Genie 2 family of mixers (1)
Stackable Wire Rack may be used in the Enviro-Genie and the Incubator-Genie to increase shelf space for use as a temperature controlled chamber. Two wire racks will fit inside the chamber to provide 3 levels for containers (1)
Stainless Steel Flask Clamp for 1000mL Flasks. Full platform capacity is 9 flask clamps. Use with Orbital-Genie for Standard Flask Clamps SI-16xx (can also be used on SI-17xx by removing the blue Adhering Mat). Includes mounting screws (1)
Stainless Steel Flask Clamp for 100mL Flasks. Full platform capacity is 36 flask clamps. Use with Orbital-Genie for Standard Flask Clamps SI-16xx (can also be used on SI-17xx by removing the blue Adhering Mat). Includes mounting screws (1)
Stainless Steel Flask Clamp for 125 or 150mL Flasks. Full platform capacity is 36 flask clamps. Use with Orbital-Genie for Standard Flask Clamps SI-16xx (can also be used on SI-17xx by removing the blue Adhering Mat). Includes mounting screws (1)
Stainless Steel Flask Clamp for 2 Liter Flasks. Full platform capacity is 5 flask clamps. Use with Orbital-Genie for Standard Flask Clamps SI-16xx (can also be used on SI-17xx by removing the blue Adhering Mat). Includes mounting screws (1)
Stainless Steel Flask Clamp for 250mL Flasks. Full platform capacity is 25 flask clamps. Use with Orbital-Genie for Standard Flask Clamps SI-16xx (can also be used on SI-17xx by removing the blue Adhering Mat). Includes mounting screws (1)
Stainless Steel Flask Clamp for 500mL Flasks. Full platform capacity is 16 flask clamps. Use with Orbital-Genie for Standard Flask Clamps SI-16xx (can also be used on SI-17xx by removing the blue Adhering Mat). Includes mounting screws (1)
Standard Platform with Bands (1)
The accessory tray may be used with the Multi-MicroPlate Genie to expand capacity for shaking of up to eight microplates at once (1)
The Non-Skid Tray for the Enviro-Genie and the Incubator-Genie attaches to the Magnetic Platform (Part No. SI-1320) to rock open containers. The Non-Skid Tray measures 203 x 305mm (8 x 12in) and is included with the Enviro-Genie and Incubator-Genie (1)
The Non-Skid Tray for the Roto-Shake Genie attaches to the Magnetic Platform (Part No. 0A-1100-030) to rock open containers. The Non-Skid Tray measures 305 x 305mm (12 x 12in) (1)
Tube Holder holds six 50mL tubes horizontally. Holder snaps on to any Vortex-Genie 2 mixer and the Vortex-Genie Pulse. No additional attachment necessary (1)
Tube Holder holds six 50mL tubes vertically. Holder snaps on to any Vortex-Genie 2 mixer and the Vortex-Genie Pulse. No additional attachment necessary (1)
Tube Holder holds six 50mL, six 15mL and twelve microtubes vertically. Holder snaps on to any Vortex-Genie 2 product and the Vortex-Genie Pulse. No additional attachment necessary (1)
Tube Holder holds twelve 15mL tubes horizontally. Holder snaps on to any Vortex-Genie 2 mixerand the Vortex-Genie Pulse. No additional attachment necessary (1)
Tube Holder holds twelve 15mL tubes vertically. Holder snaps on to any Vortex-Genie 2 mixer and the Vortex-Genie Pulse. No additional attachment necessary (1)
Tube Holder holds twenty-four microtubes horizontally. Holder snaps on to any Vortex-Genie 2 mixer and the Vortex-Genie Pulse. No additional attachment necessary (1)
Tube Holder holds twenty-four microtubes vertically. Holder snaps on to any Vortex-Genie 2 mixer and the Vortex-Genie Pulse. No additional attachment necessary (1)
Tube Rack to hold up to 12 tubes for the Multi Vortex-Genie. Accommodates tubes of any material type, up to 29mm diameter (1)
Two Elastic Bands securely fasten various sample vessels to the Recessed Platform (Part No. 504-0039-00). Sample vessels of up to 500ml can be used as well as microplates (1)
Two high-density Foam Inserts are customizable by the user for odd-shaped vessels. The insert fits into the Recessed Platform (Part No. 504-0039-00) for use with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse (1)
Two high-density Foam Inserts to accommodate 14-29mm diameter tubes. The insert fits into the Recessed Platform (Part No. 504-0039-00) for use with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse (1)
Two high-density Foam Inserts to accommodate 29-37mm diameter tubes. The insert fits into the Recessed Platform (Part No. 504-0039-00) for use with the Vortex-Genie 2 family of mixers and the Vortex-Genie Pulse (1)
Two high-density Foam Inserts to accommodate 9-16mm diameter tubes. The insert fits into the Recessed Platform (Part No. 504-0039-00) (1)
Two stainless steel Trays and 24 magnetic Bag Mounting Strips used to attach sealed bags to the Magnetic Platform (Part No. 0A-1100-030) for use with the Roto-Shake Genie,Enviro-Genie or Incubator-Genie for increased bag capacity (1)
Your web browser does not have JavaScript enabled. In order to use most of the functionality of this website, you will need to have JavaScript enabled in your browser.
Browser Cookies Are Disabled
Your web browser does not have Cookies enabled. In order to use most of the functionality of this website, you will need to have cookies enabled in your browser.
Get this item now!
Choose your preferred shipping method or pick-up branch during Checkout.
Please enter a quantity and ZIP code above to check availability.
Product availability is real-time and adjusted continuously. This product will be reserved for you when you complete your order. If your organization requires order approval, the product will be reserved once Grainger receives the final approved order based on product availability at that time.
If the settings on your account have changed since this order was submitted, they will be updated when this order is approved.
Pricing and availability are not confirmed until the order is processed. Promotional pricing and offers associated with this order will only apply if the order is approved within the timeframe of the promotion.